Section 25 (Electronic Control Modules (Service Information))
WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
- Electronic Control Modules
- Standard Procedure
- Communication
- Data Link Connector
- Module-Adjustable Pedals
- Module-Antilock Brakes
- Module-Engine Control
- Description
- Operation
- Standard Procedure
- Pcm/ECM Programming - Diesel
- Pcm / TCM Flash Reprogramming
- Table Of Contents
- Section 1 - Pcm / TCM Flash Procedure
- REPAIR PROCEDURE - Using StarSCAN® or StarMOBILE® Desktop Client
- REPAIR PROCEDURE - Using StarMOBILE® Standalone Diagnostic Mode
- Section 2 - Additional Pcm / TCM Replacement Procedures
- Step-By-Step Instructions
- Section 3 - Authorized Modification Label
- Required Tools/Equipment:
- TECH TIPS and INFORMATION:
- Parts Required
- Pcm/ECM Programming - Diesel
- Removal
- Installation
- Module-Final Drive Control
- Module-Front Control
- Module-Memory Mirror
- Module-Memory Seat
- Module-Powertrain Control
- Description
- Operation
- Standard Procedure
- Pcm/ECM Programming - Gas
- Pcm / TCM Flash Reprogramming
- Table Of Contents
- Section 1 - Pcm / TCM Flash Procedure
- REPAIR PROCEDURE - Using StarSCAN® or StarMOBILE® Desktop Client
- REPAIR PROCEDURE - Using StarMOBILE® Standalone Diagnostic Mode
- Section 2 - Additional Pcm / TCM Replacement Procedures
- Step-By-Step Instructions
- Section 3 - Authorized Modification Label
- Required Tools/Equipment:
- TECH TIPS and INFORMATION:
- Parts Required
- Pcm/ECM Programming - Gas
- Removal
- Installation
- Module-Steering Control
- Module-Transmission Control
- Description
- Operation
- Transmission Control Module - 3.7L Gas/3.0L Diesel Vehicles
- Notes
- TCM Signals
- Selector Lever Position
- ATF Temperature Sensor
- Starter Interlock
- N2 and N3 Speed Sensors
- CAN C Bus Indirect Input Signals
- Shift Schedules
- Downshift Safety
- Adaptation
- Driving Style Adaptation
- Shift Time Adaptation (Shift Overlap Adaptation, Working Pressure)
- Fill Pressure Adaptation (Apply Pressure Adaptation, Modulating Pressure)
- Fill Time Adaptation (Engagement Time Adaptation)
- Controller Modes Of Operation
- Transmission Control Module - 4.7L/5.7L Vehicles
- Transmission Control Module - 3.7L Gas/3.0L Diesel Vehicles
- Standard Procedure
- Drive Learn - 4.7L/5.7L Vehicles
- Notes
- Learn A Smooth 1ST Neutral To Drive Shift
- Learn A Smooth Neutral To Drive Garage Shift
- Learn The 1ST 2-3 Shift After A Restart Or Shift To Reverse
- Learn A Smooth 2-3 And 3-4 Upshift
- Learn A Smooth 4-3 COASTDOWN And Part Throttle 4-3 KICKDOWN
- Learn A Smooth 1-2 Upshift And 3-2 KICKDOWN
- Learn A Smooth Manual 2-1 PULLDOWN Shift As Well As A Neutral To Reverse Shift
- Learn A Smooth Neutral To Reverse Shift
- Learn A Smooth 4-5 Upshift
- Transmission Control Module - Adaptation - 3.7L Gas/3.0L Diesel Vehicles
- Transmission Control Module - Quick Learn - 4.7L/5.7L Vehicles
- Drive Learn - 4.7L/5.7L Vehicles
- Removal
- Installation
- Node-Wireless Ignition
- Module-Glow Plug