Transmission Control Module - 3.7L Gas/3.0L Diesel Vehicles
WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - TRANSMISSION CONTROL MODULE |
| 2 - DASH PANEL |
| 3 - WIRING CONNECTORS |
- Connect the wiring connectors (3) to the transmission control module (1). See Fig 1.
- Install the module to the dash panel (2) or the mounting bracket.
- Fold the dash panel silencer pad back over the module and retain the pad in place with suitable adhesive tape.