LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Electronic Control Modules (Service Information)) >> Electronic Control Modules >> Module-Transmission Control >> Removal >> Transmission Control Module - 3.7L Gas/3.0L Diesel Vehicles

Transmission Control Module - 3.7L Gas/3.0L Diesel Vehicles

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Dash Panel Silencer Pad
GC0027625Courtesy of CHRYSLER LLC
1 - CUT LINES
2 - DASH PANEL SILENCER PAD
3 - STEERING COLUMN LOCATION
  1. Locate the transmission control module on the dash panel, under the dash panel silencer pad (2), just to the right of the steering column. See Fig 1.
  2. Locate the cut lines (1) marked on the silencer pad. Cut the pad along these lines.
    Fig 2: Transmission Control Module Location - 3.0L & 3.7L Vehicles
    GC0027623Courtesy of CHRYSLER LLC
    1 - TRANSMISSION CONTROL MODULE
    2 - DASH PANEL
    3 - WIRING CONNECTORS
  3. Remove the transmission control module from the dash panel or bracket.
  4. Disconnect the wiring harness connectors (3) from the module.
  5. Remove the module from the vehicle.
scientia non olet · About LEMON Manuals