LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Electronic Control Modules (Service Information)) >> Electronic Control Modules >> Module-Glow Plug >> Removal >> ECM

Module-Glow Plug: Removal: ECM

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
    Fig 1: Glow Plug Module
    GC0052481Courtesy of CHRYSLER LLC
  2. Disconnect the battery positive harness connector (3) from the glow plug module.
  3. Disconnect the glow plug harness connector (4).
  4. Remove the two glow plug module bolts (2).
  5. Remove the glow plug module (1).
scientia non olet · About LEMON Manuals