Troubleshooting - B-CAN System Diagnosis Test Mode B
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Honda Odyssey, 2016 Honda Odyssey, 2015 Honda Odyssey, 2014 Honda Odyssey, and 2013 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
Do this diagnosis if any of the control units are not communicating (NOT AVAILABLE is displayed on the HDS) as found by the B-CAN System Diagnosis Test Mode A (see TROUBLESHOOTING - B-CAN SYSTEM DIAGNOSIS TEST MODE A ).
- Using the HDS, select the system that has the symptom from the BODY ELECTRICAL SYSTEM SELECT menu.
- Select DTCs, and then check for loss of communication DTCs.
Are any loss of communication DTCs indicated?
YES -Go to step 3.
NO -Faulty MICU; replace the driver's under-dash fuse/relay box, USA modes (see DRIVER'S UNDER-DASH FUSE/RELAY BOX (MICU) REMOVAL AND INSTALLATION ), Canada models (see CANADA MODELS ).
- Do the power, ground, and communication part of the input test for the unit(s) not communicating with the HDS.B-CAN SYSTEM TROUBLESHOOTING CHART