Section 17 (Air Conditioning)
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- 87 Air Conditioning
- Component Location Overview - A/C System
- Refrigerant Circuit
- System Overview - Refrigerant Circuit
- Overview - Condenser
- High Pressure Sensor -G65-, Removing And Installing
- Overview - Refrigerant Lines
- Refrigerant Lines With Inner Heat EXCHANGER, Removing And Installing
- Refrigerant Lines In Plenum Chamber, Removing And Installing
- Expansion Valve, Removing And Installing
- Condenser, Removing And Installing
- Refrigerant Lines, Disconnecting And Connecting At Condenser
- Desiccant Bag/Dryer Cartridge, Removing And Installing
- Evacuating And Charging Valve, Removing And Installing, Low And High Pressure Side
- A/C System, Starting After Charging Refrigerant Circuit
- A/C Compressor
- Overview - A/C Compressor Power Unit
- Overview - Belt Pulley
- OVERVIEW - A/C COMPRESSOR BELT PULLEY, "Denso" VERSION "1"
- OVERVIEW - A/C COMPRESSOR BELT PULLEY, "Denso" VERSION "2"
- OVERVIEW - A/C COMPRESSOR BELT PULLEY WITH A/C Clutch -N25-, "Denso"
- OVERVIEW - BELT PULLEY, "Sanden" A/C COMPRESSOR
- OVERVIEW - A/C COMPRESSOR BELT PULLEY WITH A/C Clutch -N25-, "Sanden"
- A/C Compressor, Removing And Installing From Bracket
- Refrigerant Lines, Removing And Installing At A/C Compressor
- A/C Compressor, Removing And Installing
- Preliminary Work For Replacing Belt Pulley
- Belt Pulley, Removing And Installing, Without Magnetic Clutch
- Belt Pulley With A/C Clutch -N25-, Removing And Installing
- Belt Pulley With A/C Clutch -N25- Information
- CLUTCH PLATE, REMOVING AND INSTALLING, "Denso" A/C COMPRESSOR
- CLUTCH PLATE, REMOVING AND INSTALLING, A/C COMPRESSOR "Sanden" (WITH A/C Clutch -N25-)
- Belt Pulley, Removing
- GAP DIMENSION, CHECKING BETWEEN BELT PULLEY AND CLUTCH PLATE, "Denso" A/C COMPRESSOR
- GAP DIMENSION BETWEEN BELT AND CLUTCH PLATE, CHECKING, "Sanden" A/C COMPRESSOR (WITH A/C Clutch -N25-)
- Adjustment Motors
- Component Location Overview - Front Adjustment Motors
- Overview - Front Adjustment Motors
- Actuator Characteristics According To Manufacturer
- Overview - Left Front Adjustment Motors, Pr Number 9AQ
- Overview - Right Front Adjustment Motors, Pr Number 9AQ
- Overview - Left Front Adjustment Motors, Pr Number 9AK/KH5
- Overview - Right Front Adjustment Motors, Pr Number 9AK/KH5
- Overview - Actuators On Air Intake Manifold
- Overview - Rear Adjustment Motors
- General Information And Procedures - Actuators, Removing And Installing
- Fresh Air Door Motor -V438-, Removing And Installing
- Defroster Door Motor -V107-, Removing And Installing
- Left FOOTWELL Door Motor -V108-, Removing And Installing
- Right FOOTWELL Door Motor -V109-, Removing And Installing
- Left Center Vent Motor -V110-, Removing And Installing, Pr Number 9AQ
- Right Center Vent Motor -V111-, Removing And Installing, Pr Number 9AQ
- RECIRCULATION Door Motor -V113-, Removing And Installing
- Rear Temperature Control Door Motor -V137- /Left Rear Air Door Motor -V239-, Removing And Installing
- Left Temperature Control Door Motor -V158-, Removing And Installing
- Right Temperature Control Door Motor -V159-, Removing And Installing
- Right B-Pillar/FOOTWELL Shut-Off Door Motor -V211- / Left B-Pillar/FOOTWELL Shut-Off Door Motor -V212-, Removing And Installing
- Left Side Vent Motor -V299-, Removing And Installing, Pr Number 9AQ
- Left Center Vent Motor -V110-, Removing And Installing, Pr Number 9AK, KH5
- Right Center Vent Motor -V111-, Removing And Installing, Pr Number 9AK, KH5
- Right Side Vent Motor -V300-, Removing And Installing, Pr Number 9AQ
- Rear Air Distribution Door Motor -V427- / Right Rear Air Distribution Motor -V594-, Removing And Installing
- Left Rear Air Distribution Motor -V593-, Removing And Installing
- Right Rear Air Door Motor -V240-, Removing And Installing
- Bracket For Adjustment Motors On Front Heater And A/C Unit, Removing And Installing
- BRACKET FOR Rear Temperature Control Door Motor :V137/ Left Rear Air Door Motor -V239-, REMOVING AND INSTALLING
- Bracket For Left Actuators, Removing And Installing, Pr Number 9AQ
- Bracket For Left Actuators, Removing And Installing, Pr Number 9AK/KH5
- Bracket For Right Actuators, Removing And Installing, Pr Number 9AQ
- Bracket For Right Actuators, Removing And Installing, Pr Number 9AK/KH5
- BRACKET FOR Rear Air Distribution Door Motor -V427- / Right Rear Air Distribution Motor -V594-, REMOVING AND INSTALLING
- BRACKET FOR Left Rear Air Distribution Motor -V593-, REMOVING AND INSTALLING
- BRACKET FOR Right Rear Air Door Motor -V240-, REMOVING AND INSTALLING
- Front Heater And A/C Unit
- Overview - Heater And A/C Unit
- Overview - Front Heater And A/C Unit Attachments, Air Distribution Housing, Heat EXCHANGER, Etc.
- Overview - Heater And A/C Unit Air Intake Housing
- Overview - Evaporator Housing
- Evaporator, Removing And Installing
- Evaporator, Cleaning
- Auxiliary Heater Heating Element -Z35-, Removing And Installing
- Heater And A/C Unit, Removing And Installing
- Air Intake Manifold From Heater And A/C Unit, Removing And Installing
- Dust And Pollen Filter, Removing And Installing
- Fresh Air Blower -V2- With Fresh Air Blower Control Module -J126-, Removing And Installing
- Heater Core, Removing And Installing
- Condensation Water Drain Hose, Removing And Installing
- Condensation Water Drain Hose, Checking
- Air Routing
- Overview - Air Routing And Air Distribution In Vehicle Interior
- Air Intake And Outlet Openings
- Air Duct For Center Instrument Panel Vents, Removing And Installing
- Driver Side FOOTWELL Vent, Removing And Installing
- Front Passenger Side FOOTWELL Vent, Removing And Installing
- Air Duct For Glove Compartment Cooling, Removing And Installing
- Rear Air Duct, Removing And Installing
- Rear Vent Air Duct, Removing And Installing
- Vehicle Interior Forced Air Extraction, Removing And Installing
- Vehicle Interior Forced Air Extraction, Checking
- Fresh Air Intake, Removing And Installing
- Plenum Chamber Water Drain, Checking
- Plenum Chamber Water Drain, Cleaning
- Coolant Circuit
- Heating And A/C System, Integrating In Engine Coolant Circuit
- Incorporating The Heating And A/C System In The Coolant Circuit Information
- Heating And A/C System, Incorporating In The Coolant Circuit, Vehicles Without Parking Heater, 4-Cylinder TDI Engine
- Heating And A/C System, Incorporating In The Coolant Circuit, Vehicles Without Parking Heater, V6 3.0L TDI Engine
- Heating And A/C System, Incorporating In The Coolant Circuit, Vehicles Without Parking Heater, 4-Cylinder TFSI Engine
- Heating And A/C System, Incorporating In The Coolant Circuit, Vehicles Without Parking Heater, V6 3.0L FSI Engine
- Incorporation Of Heating And A/C System Into Coolant Circuit, Vehicles With A Parking Heater
- Coolant Circuit, Bleeding
- Heating And A/C System, Integrating In Engine Coolant Circuit
- Display Control Head
- Additional Components For Control And Regulation
- Air Quality Sensor -G238- / Exterior Air Quality And Humidity Sensor -G935-, Removing And Installing
- Outside Air Temperature Sensor -G17-, Removing And Installing
- Left And Right Front Upper Body Vent Temperature Sensor -G385- / -G386-, Removing And Installing
- Left FOOTWELL Vent Temperature Sensor -G261-, Removing And Installing
- Right FOOTWELL Vent Temperature Sensor -G262-, Removing And Installing
- Evaporator Vent Temperature Sensor -G263-, Removing And Installing
- Left Rear Upper Body Vent Temperature Sensor -G635- / Right Rear Upper Body Vent Temperature Sensor -G636-, Removing And Installing
- Left Rear FOOTWELL Vent Temperature Sensor -G637- / Right Rear FOOTWELL Vent Temperature Sensor -G638-, Removing And Installing
- Instrument Panel Temperature Sensor -G56-, Removing And Installing
- Humidity Sensor -G355-, Removing And Installing
- Air Ionization
- Component Location Overview - Air Ionization
- Overview - Fragrance System
- Fragrance Diffuser System Control Module -J1101- With Fragrance Diffuser System Blower -V686-, Removing And Installing
- Fragrance System Functional Unit -GX43-, Removing And Installing
- Fragrance Diffuser System Actuator -V687-, Removing And Installing
- Fragrance Diffuser System Temperature Sensor -G1056-, Removing And Installing
- Fragrance System Hoses, Removing And Installing
- Ionizer Control Module -J897-, Removing And Installing
- Driver Side Ionizer - J1105-, Removing And Installing
- Front Passenger Side Ionizer -J1106-, Removing And Installing
- A/C System Particulate Matter Concentration Sensor -G930-, Removing And Installing
- Special Tools