LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2023 >> S7 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Air Conditioning) >> 87 Air Conditioning >> Air Ionization >> Fragrance Diffuser System Control Module -J1101- With Fragrance Diffuser System Blower -V686-, Removing And Installing >> Installing

Fragrance Diffuser System Control Module -J1101- With Fragrance Diffuser System Blower -V686-, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- If the Fragrance Diffuser System Control Module -J1101- with Fragrance Diffuser System Blower - V686- is replaced, the corresponding test plan must be executed.

Procedure 

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  mode and start the diagnosis.

-- Select the Test plan  tab.

-- Press the Select custom test  button and select the following tree structure in order: