Display Control Head, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2022 Audi S7, 2022 Audi RS 7 Sportback, 2022 Audi A7 e Quattro, 2022 Audi A7 Quattro, and 2021 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- If the Rear A/C Display Control Head - E265- is replaced, perform the test plan to replace the Rear A/C Display Control Head -E265-. Refer to Vehicle Diagnostic Tester.
Procedure
-- Connect the Vehicle Diagnostic Tester.
-- Select Diagnostic mode and start the diagnosis.
-- Select the Test plan tab.
-- Press the Select custom test button and select the following tree structure in order:
- Diagnostic-capable systems
- 0009 - Electronic central electric - J519
- 0009 - Electronic central electric, functions
- 0009 - E265 - Rear A/C Display Control Head
- → Replace control module
| Component | Tightening Specification |
|---|---|
| Rear A/C display control head | 2 Nm |