LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Continuously Variable Transaxle (CVT) (Service Information)) >> Front Reduction Drive Gear >> Removal

Front Reduction Drive Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the air breather hose. <Ref. to REMOVAL , Air Breather Hose.>
  3. Remove the oil pan and control valve body. <Ref. to REMOVAL , Control Valve Body.>
  4. Remove the transmission harness. <Ref. to REMOVAL , Transmission Harness.>
  5. Remove the primary speed sensor. <Ref. to REMOVAL , Primary Speed Sensor.>
  6. Remove the extension case. <Ref. to REMOVAL , Extension Case.>
  7. Remove the rear drive shaft. <Ref. to REMOVAL , Rear Drive Shaft.>
  8. Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
  9. Remove the center differential carrier. <Ref. to REMOVAL , Center Differential Carrier.>
  10. Remove the transfer reduction driven gear assembly. <Ref. to REMOVAL , Transfer Reduction Driven Gear.>
  11. Remove the intermediate case. <Ref. to REMOVAL , Intermediate Case.>
  12. Remove the forward clutch assembly. <Ref. to REMOVAL , Forward Clutch Assembly.>
  13. Remove the transmission case. <Ref. to REMOVAL , Transmission Case.>
  14. Remove the primary pulley, secondary pulley and variator chain. <Ref. to REMOVAL , Primary Pulley and Secondary Pulley.>
  15. Remove the drive pinion shaft assembly. <Ref. to REMOVAL , Drive Pinion Shaft Assembly.>
  16. Remove the oil pump chain cover and the oil pump chain. <Ref. to REMOVAL , Oil Pump Chain.>
  17. Remove the converter case cover. <Ref. to REMOVAL , Converter Case Cover.>
  18. Remove the front reduction drive gear and front reduction driven gear together.
    NOTE: Remove the front reduction driven shaft while holding it.
    Fig 1: Removing Front Reduction Driven Shaft
    G09482339Courtesy of SUBARU OF AMERICA, INC.
  19. Remove the shims of the front reduction driven gear from the converter case.
  20. Remove the seal rings.
Fig 2: Removing Seal Ring From Converter Case Cover
G09482326Courtesy of SUBARU OF AMERICA, INC.