LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Continuously Variable Transaxle (CVT) (Service Information)) >> Transfer Reduction Driven Gear >> Removal

Transfer Reduction Driven Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission assembly from the vehicle. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the extension case. <Ref. to REMOVAL , Extension Case.>
  3. Remove the rear drive shaft. <Ref. to REMOVAL , Rear Drive Shaft.>
  4. Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
  5. Remove the center differential carrier. <Ref. to REMOVAL , Center Differential Carrier.>
  6. Remove the transfer reduction driven gear assembly.
Fig 1: Removing Transfer Reduction Driven Gear Assembly
G10268236Courtesy of SUBARU OF AMERICA, INC.