Drive Pinion Shaft Assembly: Removal
WARNING: This page is about a different variant/trim than selected.
- Remove the transmission assembly from the vehicle. <Ref. to REMOVAL , Automatic Transmission Assembly.>
- Remove the air breather hose. <Ref. to REMOVAL , Air Breather Hose.>
- Remove the oil pan and control valve body. <Ref. to REMOVAL , Control Valve Body.>
- Remove the transmission harness. <Ref. to REMOVAL , Transmission Harness.>
- Remove the extension case. <Ref. to REMOVAL , Extension Case.>
- Remove the rear drive shaft. <Ref. to REMOVAL , Rear Drive Shaft.>
- Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
- Remove the center differential carrier. <Ref. to REMOVAL , Center Differential Carrier.>
- Remove the transfer reduction driven gear assembly. <Ref. to REMOVAL , Transfer Reduction Driven Gear.>
- Remove the intermediate case. <Ref. to REMOVAL , Intermediate Case.>
- Remove the forward clutch assembly. <Ref. to REMOVAL , Forward Clutch Assembly.>
- Remove the transmission case. <Ref. to REMOVAL , Transmission Case.>
- Remove the primary pulley, secondary pulley and variator chain. <Ref. to REMOVAL , Primary Pulley and Secondary Pulley.>
- Using the ST, remove the drive pinion retainer and lubrication pipe.
ST 18270KA020 SOCKET (E20)
- Remove the O-rings.
- Remove the oil pump and the plate.
- Remove the O-rings.