Automatic Trans: Overhaul
- General Information
- Hydraulic Circuit
- Special Tools
- Transaxle
- Oil Pump
- UNDERDRIVE Clutch And Input Shaft
- Reverse And Overdrive Clutch
- Planetary Gear
- Low-Reverse Brake
- Second Brake
- Output Shaft
- Differential
- Valve Body
- Drive Shaft Oil Seal
- Specifications
- Fastener Tightening Specifications
- General Specifications
- Service Specifications
- Valve Body Spring Identification Table
- Adjusting Plate, Snap Ring And Spacers
- Thrust Washer (For Adjustment Of Input Shaft End Play)
- Snap Ring < F4A42> (For ADJUSTEMENT Of UNDERDRIVE Clutch And Overdrive Clutch End Play)
- Snap Ring < F4A51> (For Adjustment Of UNDERDRIVE Clutch And Overdrive Clutch End Play)
- Snap Ring < F4A42> (For Adjustment Of Low-Reverse Brake And Second Brake Reaction Plates End Play)
- Snap Ring < F4A51> (For Adjustment Of Low-Reverse Brake And Second Brake Reaction Plates End Play)
- Pressure Plate < F4A42> (For Adjustment Of Low-Reverse Brake And Second Brake End Play)
- Pressure Plate < F4A51> (For Adjustment Of Low-Reverse Brake And Second Brake End Plays)
- Snap Ring < F4A42> (For Adjustment Of Reverse Clutch End Play)
- Snap Ring < F4A51> (For Adjustment Of Reverse Clutch End Play)
- Snap Ring (For Adjustment Of Reverse Clutch And Overdrive Clutch Spring Retainer End Plays)
- Thrust Race (For Adjustment Of UNDERDRIVE Sun Gear End Play)
- Spacer (For Adjustment Of Output Shaft Preload)
- Spacer (For Adjustment Of Differential Case Preload)
- Spacer (For Adjustment Of Backlash Between Differential Side Gear And Pinion)