Converter Case: Installation

WARNING: This page is about a different variant/trim than selected.

Install the front reduction drive gear and front reduction driven gear. <Ref. to INSTALLATION , Front Reduction Drive Gear.>
Install the converter case cover. <Ref. to INSTALLATION , Converter Case Cover.>
Install the oil pump chain cover and the oil pump chain. <Ref. to INSTALLATION , Oil Pump Chain.>
Install the front differential assembly. <Ref. to INSTALLATION , Front Differential Assembly.>
Install the drive pinion shaft assembly. <Ref. to INSTALLATION , Drive Pinion Shaft Assembly.>
Install the primary pulley, secondary pulley and variator chain. <Ref. to INSTALLATION , Primary Pulley and Secondary Pulley.>
Install the transmission case. <Ref. to REMOVAL , Transmission Case.>
Install the forward clutch assembly. <Ref. to INSTALLATION , Forward Clutch Assembly.>
Install the intermediate case. <Ref. to INSTALLATION , Intermediate Case.>
Install the transfer reduction driven gear. <Ref. to INSTALLATION , Transfer Reduction Driven Gear.>
Install the center differential carrier. <Ref. to INSTALLATION , Center Differential Carrier.>
Install the transfer clutch assembly. <Ref. to INSTALLATION , Transfer Clutch.>
Install the rear drive shaft. <Ref. to INSTALLATION , Rear Drive Shaft.>
Install the extension case. <Ref. to INSTALLATION , Extension Case.>
Install the primary speed sensor. <Ref. to INSTALLATION , Primary Speed Sensor.>
Install the secondary pressure sensor. <Ref. to INSTALLATION , Secondary Pressure Sensor.>
Install the transmission harness. <Ref. to INSTALLATION , Transmission Harness.>
Install the control valve body and oil pan. <Ref. to INSTALLATION , Control Valve Body.>
Install the air breather hose. <Ref. to INSTALLATION , Air Breather Hose.>
Install the transmission assembly to the vehicle. <Ref. to INSTALLATION , Automatic Transmission Assembly.>