Section 120 (Security Control System (DTC/Circuit Diagnosis))
WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
- DTC Index
- DTC/Circuit Diagnosis
- DTC P1610: Lock Mode
- DTC P1611: Immobilizer Control Unit (IMMU) And ECM Id Verification Fault
- DTC P1612: Immobilizer Control Unit (IMMU) And ECM Inactive Communication
- DTC P1614: NATS Antenna Amplifier And BCM Inactive Communication
- DTC B2192: BCM And ECM Id Verification Fault
- DTC B2193: BCM And ECM Inactive Communication
- DTC B2195: BCM And ECM Id Verification Out Of Spec
- DTC B2196: BCM And Dongle Unit Id Verification Fault
- DTC B2198: NATS Antenna Amp And BCM Inactive Communication
- DTC B2555: Stop Lamp Circuit Malfunction
- DTC B2556: Push-Button Ignition Switch Stuck On
- DTC B2557: Vehicle Speed Signal Variation
- DTC B2601: P-Position Signal / P-Range Signal Variation
- DTC B2602: Vehicle Speed Value With Selector Lever In P-Position
- DTC B2603: Shift Position Status Signal Fault
- DTC B2604: Park Neutral Position / Shift Position Signal Variation
- DTC B2605: P/N Position Signal Mismatch
- DTC B2608: Starter Motor Relay Signal Mismatch
- DTC B260F: Engine Status Signal Not Received With Ignition Switch In "On" Position
- DTC B261B: Remote Engine Start Operation Status Fault
- DTC B26F3: Starter Control Relay "Off" Status Signal Not Received
- DTC B26F4: Starter Control Relay "On" Status Signal Not Received
- DTC B26F7: BCM Inside Key Antenna Output Circuit Malfunction
- DTC B26F8: BCM Feedback Circuit Signal And Starter Control Relay Control Signal Mismatch
- DTC B26FC: Intelligent Key Registration Invalid
- DTC B26FE: Hood Switch 1 / Hood Switch 2 Signal Mismatch
- DTC B210B: Starter Control Relay Stuck In "On" Position
- DTC B210C: Starter Control Relay Stuck In "Off" Position
- DTC B210D: Starter Relay Stuck In "On" Position
- DTC B210E: Starter Relay Stuck In "Off" Position
- DTC B210F: P/N Position Signal Mismatch (Switch On)
- DTC B2110: Shift P/N Position Signal Mismatch (Switch Off)
- Headlamp Function
- Hood Switch
- Horn Function
- Security Indicator Lamp