LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B26FE: Hood Switch 1 / Hood Switch 2 Signal Mismatch >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • If DTC B26FE is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC LOGIC .
  • If DTC B26FE is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC LOGIC .
DTC CONSULT display description DTC detecting condition Possible cause
B26FE HOOD SW CAN DIAG ERROR Hood switch signals (Hood switch 1 and Hood switch 2) received from IPDM E/R via CAN communication are different.
  • Harness or connector

    (hood switch circuit is open or shorted)

  • Hood switch 1
  • Hood switch 2
scientia non olet · About LEMON Manuals