LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> QX80 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 120 (Security Control System (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> DTC B26F3: Starter Control Relay "Off" Status Signal Not Received >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX80. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Press push-button ignition switch under the following conditions to start engine.
      • Selector lever: In the P position
      • Brake pedal: Depressed
    2. Wait 2 seconds after engine started.
    3. Check DTC in "Self Diagnostic Result" mode of "BCM" using CONSULT.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    INSPECTION END

scientia non olet · About LEMON Manuals