Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 9 Of 13

• CEM-8F02: Left-Hand Turn Signal Lamp. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F02
  • Signal Too Low
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F03: Right Direction Indicator. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault.
• CEM-8F03: Right Direction Indicator. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
• CEM-8F03: Right-Hand Turn Signal Lamp. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F03
  • Signal Too Low
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F04: Turn Signal Lamp. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F04
  • Faulty Signal
    • Checking the Status
    • Verification
    • Information
      • Fault-tracing information
• CEM-8F05: Switch, Hazard Warning Signal Flashers. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking the Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-8F05
• CEM-8F06: Switch, Hazard Warning Signal Flashers. Signal Missing (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F06
  • Signal Missing
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F07: Switch, Hazard Warning Signal Flashers. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F07
  • Signal Too Low
    • Checking the Wiring
    • Checking Over Temperature
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F08: Engine Control Module (ECM). Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F08
  • Signal Too Low
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F09: Engine Control Module (ECM). Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F09
  • Signal Too High
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F11: CEM Headlamp Beam Height Control. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F11
  • Signal Too High
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F11: Light Width Control. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking the Wiring
    • Information
      • Fault-Tracing Information
• CEM-8F11: Light Width Control. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F12: Beam Setting Control. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking the Wires And Contacts
    • Information
      • Fault-Tracing Information
• CEM-8F12: Beam Setting Control. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking Component And Contacts
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F12: CEM Headlamp Beam Height Control. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F12
  • Signal Too Low
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F13: Light Width Control. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Signal Wires
    • Information
      • Fault-Tracing Information
• CEM-8F13: Light Width Control. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking the Component
    • Checking the Signal Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F13: LSM Headlamp Beam Height Control. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F13
  • Signal Too High
    • Replacing the Component
    • Information
      • Fault-Tracing Information
• CEM-8F14: Light Width Control. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Signal Wires
    • Information
      • Fault-Tracing Information
• CEM-8F14: Light Width Control. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking the Component
    • Checking the Signal Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F14: LSM Headlamp Beam Height Control. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F14
  • Signal Too Low
    • Replacing the Component
    • Information
      • Fault-tracing information
• CEM-8F15: Xenon Lamp Left. Faulty Signal (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking the Status
    • Replacing the Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F15: Xenon Lamp Left. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F15
  • Faulty Signal
    • Checking the Status
    • Replacing A Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F16: Xenon Lamp Left. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F16
  • Signal Too Low
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F16: Xenon Lamp Left. Signal Too Low (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F17: Xenon Lamp Left. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F17
  • Faulty Signal
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F17: Xenon Lamp Left. Faulty Signal (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking the Status
    • Replacing the Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F18: Xenon Lamp Left. Signal Too High/Signal Missing (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High/Signal Missing
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F18: Xenon Lamp Left. Signal Too High/Signal Missing (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F18
  • Signal Too High/Signal Missing
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-tracing information
• CEM-8F19: Xenon Lamp Right. Faulty Signal (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking the status
    • Replacing the component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F19: Xenon Lamp Right. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F19
  • Faulty Signal
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F1A: Xenon Lamp Right. Signal Too Low (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low
    • Checking the status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F1A: Xenon Lamp Right. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F1A
  • Signal Too Low
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-tracing information
• CEM-8F1B: Xenon Lamp Right Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F1B
  • Faulty Signal
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-tracing information
• CEM-8F1B: Xenon Lamp Right Faulty Signal (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Checking the Status
    • Replacing the Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F1C: Xenon Lamp Right. Signal Too High/Signal Missing (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F1C
  • Signal Too High/Signal Missing
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F1C: Xenon Lamp Right. Signal Too High/Signal Missing (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High/Signal Missing
    • Checking the Status
    • Checking Components And Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F1D: X-Supply Relay Circuit. Short-Circuit To Supply Voltage (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F1D
  • Short-Circuit To Supply Voltage
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F21: Windshield Wiper. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F21
  • Faulty Signal
    • Replacing the Component
    • Information
      • Fault-Tracing Information
    • Verification
• CEM-8F21: Wipers. Signal Too High/Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High/Signal Missing. Intermittent Fault
    • Checking the Wires
• CEM-8F21: Wipers. Signal Too High/Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking the Cable
    • Replacing Wiper/Washer Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F22: Windshield Wiper. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F22
  • Signal Too Low
    • Replacing the Component
    • Information
      • Fault-Tracing Information
    • Verification
• CEM-8F22: Wipers. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking the Wires
• CEM-8F22: Wipers. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High Or Signal Missing. Permanent Fault
    • Checking the Cable
    • Replacing Wiper/Washer Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F23: Relay, Windshield Wiper. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F23
  • Signal Too High
    • Checking the Component
    • Checking Fusebox
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F23: Relay, Windshield Wiper. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking the Wiring
    • Information
      • Fault-Tracing Information
• CEM-8F23: Relay, Windshield Wiper. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking And Replacing the Component
    • Checking the Fusebox
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F25: Relay, Windshield Wiper. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F25
  • Signal Too Low
    • Checking the Component
    • Checking Fusebox
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F25: Relay, Windshield Wiper. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking the Wiring
    • Information
      • Fault-Tracing Information
• CEM-8F25: Relay, Windshield Wiper. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Relay And Fusebox Engine Compartment, Replacing
  • Signal Too Low. Permanent Fault
    • Checking And Replacing the Component
    • Checking the Cables From the Fusebox To the Central Electronic Module (CEM)
    • Checking the Cable For A Short-Circuit To Ground
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F26: Windshield Wipers. Signal Too High (2006-2009)
  • Signal Too High
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-8F26
• CEM-8F26: Windshield Wiper, High Speed Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking the Relay
• CEM-8F26: Windshield Wiper, High Speed Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking the Relay And Supply
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F28: Windshield Wiper, High Speed Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Faulty Signal Or Signal Missing. Intermittent Fault
    • Checking the Relay
• CEM-8F28: Windshield Wiper, High Speed Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing. Permanent Fault
    • Checking the Relay
    • Checking the Cable
    • Verification
    • Information
      • Fault-tracing information
• CEM-8F29: Relay, Front Screen Washer Motor. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing. Intermittent Fault
    • Checking the Relay
• CEM-8F29: Relay, Front Screen Washer Motor. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing. Permanent Fault
    • Checking the Relay And Supply
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2B: Windshield Washer Motor, Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High Or Signal Missing. Intermittent Fault
    • Checking the Relay
• CEM-8F2B: Windshield Washer Motor, Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking the Relay And Supply
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2C: Windshield Wiper. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2C
  • Signal Too High
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2C: Wipers. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2C
  • Signal Too High. Intermittent Fault
    • Checking Cable
• CEM-8F2C: Wipers. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2C
  • Signal Too High. Permanent Fault
    • Checking Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2D: Windshield Wiper. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2D
  • Signal Too Low
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2D: Wipers. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2D
  • Signal Too Low. Intermittent Fault
    • Checking Cable
• CEM-8F2D: Wipers. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2D
  • Signal Too Low. Permanent Fault
    • Checking Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2E: Windshield Wiper. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F2E
  • Signal Too Low
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F2E: Wipers. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
• CEM-8F2E: Wipers. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
• CEM-8F30: Windshield Wiper Lever. Signal Missing (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F30
  • Faulty Signal
    • Replacing the Windshield Wiper Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F31: Windshield Wiper Lever. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F31
  • Faulty Signal
    • Replacing the Windshield Wiper Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F32: Windshield Wiper Lever. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F32
  • Faulty Signal
    • Replacing the Windshield Wiper Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F41: Tailgate Washer Motor Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Intermittent Fault
    • Checking the Relay And Cable
    • Information
      • Fault-Tracing Information
• CEM-8F41: Tailgate Washer Motor Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too High. Permanent Fault
    • Checking the Relay
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F43: Tailgate Washer Motor Relay. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Intermittent Fault
    • Checking the Relay And Cable
    • Information
      • Fault-Tracing Information
• CEM-8F43: Tailgate Washer Motor Relay. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Signal Too Low. Permanent Fault
    • Checking the Relay
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F44: Windshield Wiper Lever. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F44
  • Faulty Signal
    • Replacing the Windshield Wiper Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F45: Windshield Wiper Lever. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F45
  • Faulty Signal
    • Replacing the Windshield Wiper Switch
    • Verification
    • Information
      • Fault-tracing information
• CEM-8F51: Relay, Headlamp Wash/Wipe. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F51
  • Signal Too High
    • Checking the Component
    • Checking Fusebox
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F52: Relay, Headlamp Wash/Wipe. Signal Too Low Or Signal Missing (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8F52
  • Signal Too Low Or Signal Missing
    • Checking Fuses
    • Checking the Component
    • Checking Fusebox
    • Checking the Wiring
    • Checking High-Pressure Washer Pump
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8FA1: Relay, Horn. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking the Wiring
    • Information
      • Fault-Tracing Information
• CEM-8FA1: Relay, Horn. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking And Replacing the Component
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-8FA3: Relay, Signal Horn. No Signal. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing. Intermittent Fault
    • Checking the Control Module For Open-Circuits
    • Information
      • Fault-Tracing Information
• CEM-8FA3: Relay, Signal Horn. No Signal. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing. Permanent Fault
    • Checking For Contact Resistance/Oxidation
    • Replacing the Component
    • Checking For An Open-Circuit Between the Control Module And the Relay
    • Checking the Control Module For Short-Circuits
    • Verification
    • Information
      • Fault-tracing information
• CEM-8FD0: Relay, Auxiliary Lamp. Signal Too High (2006-2009)
  • Signal Too High
    • Checking the Cable
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-8FD0
• CEM-8FF0: Rain Sensor Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking the Control
    • Verification
    • Information
      • Fault-tracing information
  • Diagnostic Trouble Code (DTC) Information CEM-8FF0
• CEM-8FF1: Light Emitting Diode, Rain Sensor Button. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-8FF1
  • Signal Too Low
    • Replacing the Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-9C01: Glove Compartment Lighting. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9C01
  • Signal Too Low
    • Checking the Wiring
    • Verification
    • Information
      • Fault-tracing information
• CEM-9C02: Antenna/Light Ring. Short-Circuit To Ground (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9C02
  • Short-Circuit To Ground
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-9C03: Antenna/Light Ring. Signal Missing (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9C03
  • Signal Missing
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-9E01: Interior Lighting. Signal Too Low (2006-2009)
  • Signal Too Low
    • Checking the Wiring And Connectors
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-9E01
• CEM-9F20: Twilight Sensor. Short-Circuit To Supply Voltage (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9F20
  • Short-Circuit To Supply Voltage
    • Checking the Wiring
    • Verification
    • Information
      • Fault-tracing information
• CEM-9F21: Twilight Sensor. Short-Circuit To Ground (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9F21
  • Short-Circuit To Ground
    • Checking the Wiring
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-9F24: Rheostat. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9F24
  • Signal Too High
    • Checking the Wiring
    • Replacing the Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-9F24: Rheostat. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Fault-Tracing Information
• CEM-9F24: Rheostat. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Fault-Tracing Information
• CEM-9F25: Rheostat. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-9F25
  • Signal Too Low
    • Checking the Wiring
    • Replacing the Component
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-9F25: Rheostat. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Fault-Tracing Information
• CEM-9F25: Rheostat. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Fault-Tracing Information