Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
NOTE:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Fluid pressure check hole bolt | 7.5 | 0.76 | 5.5 |
| CVT fluid drain plug | 34 | 3.5 | 25.0 |
| Torque converter No. 1 bolt | 23 | 2.3 | 17.0 |
| Torque converter No. 2 bolt | 23 | 2.3 | 17.0 |
| Oil Strainer bolt | 7.9 | 0.81 | 6.0 |
| CVT oil pan bolt* | 7.9 | 0.81 | 6.0 |
| Valve body bolt | 7.9 | 0.81 | 6.0 |
| Manual valve lever nut | 22 | 2.2 | 16.5 |
| Oil strainer bracket bolt | 7.9 | 0.81 | 6.0 |
| Solenoid harness bolt | 7.0 | 0.71 | 5.5 |
| Transmission range sensor bolt | 5.9 | 0.60 | 4.5 |
| Manual select lever nut | 17 | 1.7 | 12.5 |
| Primary pulley speed sensor bolt | 5.9 | 0.60 | 4.5 |
| Secondary pulley speed sensor bolt | 5.9 | 0.60 | 4.5 |
| CVT fluid cooler bracket bolt No. 1 | 20 | 2.0 | 15.0 |
| CVT fluid cooler bracket bolt No. 2 | 85 | 8.7 | 63.0 |
| CVT fluid cooler bolt | 13 | 1.3 | 9.5 |
NOTE:
The specified tightening torque is described in the following.
Reference:
For the tightening torque of fastener not specified in this section, refer to: