LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2017 >> WRX Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Continuously Variable Transaxle (CVT) (Service Information)) >> Reduction Driven Gear >> Removal

Reduction Driven Gear: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the transmission from the vehicle. <Ref. to REMOVAL , Automatic Transmission Assembly.>
  2. Remove the extension case. <Ref. to REMOVAL , Extension Case.>
  3. Remove the rear drive shaft. <Ref. to REMOVAL , Rear Drive Shaft.>
  4. Remove the transfer clutch assembly. <Ref. to REMOVAL , Transfer Clutch.>
  5. Remove the center differential carrier. <Ref. to REMOVAL , Center Differential Carrier.>
  6. Remove the transfer reduction driven gear assembly. <Ref. to REMOVAL , Transfer Reduction Driven Gear.>
  7. Remove the intermediate case. <Ref. to REMOVAL , Intermediate Case.>
  8. Remove the forward clutch assembly. <Ref. to REMOVAL , Forward Clutch Assembly.>
  9. Remove the snap ring.
    Fig 1: Removing Snap Ring
    G06654605Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the reduction driven gear assembly.
    Fig 2: Removing Reduction Driven Gear Assembly
    G06654606Courtesy of SUBARU OF AMERICA, INC.
  11. Remove the straight pin.
Fig 3: Removing Straight Pin
G06654607Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals