Read Current Data: Operation

On the «Main Menu» display screen, select the {Each System Check}.
On the «System Selection Menu» display screen, select the {Integ. Unit mode}.
On the «Integ. Unit mode failure diag» display screen, select the {Current Data Display & Save}.
On the «Data Display Menu» display screen, Select the {12 Data Display}.
Using the scroll key, scroll the display screen up or down until the desired data is shown.
< Ref. to DISPLAY OF ANALOG DATA , OPERATION, Subaru Select Monitor . > < Ref. to DISPLAY OF ON/OFF DATA , OPERATION, Subaru Select Monitor . > < Ref. to CONFIRMATION OF CURRENT SETTING , OPERATION, Subaru Select Monitor . >