Section 3 (Controller Area Network (Can))
WARNING: This page is about a different car, the 2005 Mitsubishi Endeavor. However, it is still accessible from the selected car via links, so may be relevant.
- Special Tool
- Test Equipment
- Service Precautions
- Precautions On How To Repair The Can Bus Lines
- Explanation About The Mut-III Can Bus Diagnostics
- Diagnostic Trouble Code Diagnosis
- Diagnosis
- Can Bus Diagnostics Tables
- Notes
- Vehicles Without Abs And Vehicles Without Multi-Center Display (Middle-Grade Type)
- Vehicles With Abs Without ASC And Vehicles Without Multi-Center Display (Middle-Grade Type)
- Vehicles Without Abs And Vehicles With Multi-Center Display (Middle-Grade Type)
- Vehicles With Abs Without ASC And Vehicles With Multi-Center Display (Middle-Grade Type)
- Vehicles With ASC And Vehicles Without Multi-Center Display (Middle-Grade Type)
- Vehicles With ASC And Vehicles With Multi-Center Display (Middle-Grade Type)
- Can Bus Diagnostics
- DIAGNOSTIC ITEM 1: Diagnose shorts in the power supply to CAN bus line < Vehicles without ABS and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 2: Diagnose shorts in the power supply to CAN bus line < Vehicles with ABS without ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 3: Diagnose shorts in the power supply to CAN bus line < Vehicles without ABS and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 4: Diagnose shorts in the power supply to CAN bus line < Vehicles with ABS without ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 5: Diagnose shorts in the power supply to CAN bus line < Vehicles with ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 6: Diagnose shorts in the power supply to CAN bus line < Vehicles with ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 7: Diagnose shorts in the ground to CAN bus line < Vehicles without ABS and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 8: Diagnose shorts in the ground to CAN bus line < Vehicles with ABS without M-ASCT and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 9: Diagnose shorts in the ground to CAN bus line < Vehicles without ABS and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 10: Diagnose shorts in the ground to CAN bus line < Vehicles with ABS without ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 11: Diagnose shorts in the ground to CAN bus line < Vehicles with ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 12: Diagnose shorts in the ground to CAN bus line < Vehicles with ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 13: Diagnose shorts between CAN_L and H lines < Vehicles without ABS and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 14: Diagnose shorts between CAN_L and H lines < Vehicles with ABS without ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 15: Diagnose shorts between CAN_L and H lines < Vehicles without ABS and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 16: Diagnose shorts between CAN_L and H lines < Vehicles with ABS without ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 17: Diagnose shorts between CAN_L and H lines < Vehicles with ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 18: Diagnose shorts between CAN_L and H lines < Vehicles with ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 19: Diagnose terminator resistors at both ends < Vehicles without ABS >
- DIAGNOSTIC ITEM 20: Diagnose terminator resistors at both ends < Vehicles with ABS without ASC >
- DIAGNOSTIC ITEM 21: Diagnose terminator resistors at both ends < Vehicles with ASC >
- DIAGNOSTIC ITEM 22: Diagnose a terminator resistor at either end < Vehicles without ABS >
- DIAGNOSTIC ITEM 23: Diagnose a terminator resistor at either end < Vehicles with ABS without ASC >
- DIAGNOSTIC ITEM 24: Diagnose a terminator resistor at either end < Vehicles with ASC >
- DIAGNOSTIC ITEM 25: Diagnose CAN bus lines thoroughly < Vehicles without ABS and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 26: Diagnose CAN bus lines thoroughly < Vehicles with ABS without ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 27: Diagnose CAN bus lines thoroughly < Vehicles without ABS and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 28: Diagnose CAN bus lines thoroughly < Vehicles with ABS without ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 29: Diagnose CAN bus lines thoroughly < Vehicles with ASC and vehicles without multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 30: Diagnose CAN bus lines thoroughly < Vehicles with ASC and vehicles with multi-center display (middle-grade type) >
- DIAGNOSTIC ITEM 31: Diagnose the lines between CAN main bus line and the powertrain control module < Vehicles without ABS >.
- DIAGNOSTIC ITEM 32: Diagnose the lines between CAN main bus line and the powertrain control module < Vehicles with ABS without ASC >
- DIAGNOSTIC ITEM 33: Diagnose the lines between CAN main bus line and the powertrain control module < Vehicles with ASC >
- DIAGNOSTIC ITEM 34: Diagnose the lines between CAN main bus line and the ABS-ECU < with ABS without TCL without ASC > or ABS/TCL-ECU < with ABS with TCL without ASC >
- DIAGNOSTIC ITEM 35: Diagnose the lines between CAN main bus line and the ASC/TCL-ECU < Vehicles with ASC >
- DIAGNOSTIC ITEM 36: Diagnose the lines between CAN main bus line and the ETACS-ECU
- DIAGNOSTIC ITEM 37: Diagnose the lines between CAN main bus line and the multi-center display (middle-grade type)
- DIAGNOSTIC ITEM 38: Diagnose the lines between CAN main bus line and the A/C-ECU
- DIAGNOSTIC ITEM 39: Diagnose the lines between CAN main bus line and the SRS-ECU
- DIAGNOSTIC ITEM 40: Diagnose the lines between CAN main bus line and the g and yaw rate sensor
- DIAGNOSTIC ITEM 41: Diagnose the lines between CAN main bus line and the steering wheel sensor
- DIAGNOSTIC ITEM 42: Diagnose the lines between CAN main bus line and the combination meter
- Can Bus Diagnostics Tables
- How To Disconnect Joint Connector
- Can Communication Signal Table
- Can Communication-Related DTC Code (U Code) Table