Engine Control Module (ECM) - Diagnostic Trouble Codes And Associated Procedures - 5 Of 14

• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Missing. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking
      • Checking the wiring
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking
      • Checking the wiring and component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0A: Rear Heated Oxygen Sensor (Ho2S). Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2A0B: Fuel Temperature Sensor. Signal Missing (B5204T5; B5244T5; B5254T2; B5254T4; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A0B
  • Fault-tracing / Signal too high
    • Checking
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A0C: Fuel Temperature Sensor. Signal Too High (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-2A0C
  • Signal too high
• ECM-2A0C: Fuel Temperature Sensor. Signal Too High (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-2A0C
  • Signal too high
• ECM-2A0D: Fuel Temperature Sensor. Signal Too Low (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-2A0D
  • Fault-tracing
• ECM-2A0D: Fuel Temperature Sensor. Signal Too Low (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-2A0D
  • Fault-tracing
• ECM-2A10: Fuel Temperature Sensor. Signal Too High (B5204T5; B5254T4; 2006-2007)
  • Diagnostic trouble code (DTC) information ECM-2A10
  • Fault-tracing
    • Checking
      • Checking the status
      • Checking the component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A10: Fuel Temperature Sensor. Signal Too High (B5244T5; B5254T2; 2006-2009)
  • Diagnostic trouble code (DTC) information ECM-2A10
  • Fault-tracing
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
    • Replacing the heated oxygen sensor (HO2S)
      • Air-leakage: in the exhaust system, checking
      • Replacing the heated oxygen sensor (HO2S)
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Faulty Signal (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Missing (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Information, fault no longer present
      • Fault-tracing information, fault no longer present
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too High. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Replacing heated oxygen sensor (HO2S)
      • Air-leakage: in the exhaust system, checking
      • Replacing heated oxygen sensor (HO2S)
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1A: Rear Heated Oxygen Sensor (Ho2S) Aging Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Permanent fault
• ECM-2A1B: Fuel Temperature Sensor. Signal Too Low (B5204T5; B5244T5; B5254T2; B5254T4; 2006)
  • Diagnostic trouble code (DTC) information ECM-2A1B
  • Fault-tracing
• ECM-2A1C: Fuel Temperature Sensor. Signal Too High (B5204T5; B5254T4; 2006-2007)
  • Diagnostic trouble code (DTC) information ECM-2A1C
  • Fault-tracing
    • Checking
      • Checking the status
      • Checking the component and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A1C: Fuel Temperature Sensor. Signal Too High (B5244T5; B5254T2; 2006-2009)
  • Diagnostic trouble code (DTC) information ECM-2A1C
  • Fault-tracing
• ECM-2A1D: Fuel Temperature Sensor. Signal Too Low (B5204T5; B5254T4; 2006-2007)
  • Diagnostic trouble code (DTC) information ECM-2A1D
  • Fault-tracing
• ECM-2A1D: Fuel Temperature Sensor. Signal Too Low (B5244T5; B5254T2; 2006-2009)
  • Diagnostic trouble code (DTC) information ECM-2A1D
  • Fault-tracing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking
      • Checking the connector
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Missing (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2A20: Heated Oxygen Sensor (Ho2S) Bank 1, Preheating. Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking
      • Checking the connector
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Information, fault no longer present
      • Fault-tracing information, fault no longer present
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Faulty Signal. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Replacing heated oxygen sensor (HO2S)
      • Replacing heated oxygen sensor (HO2S)
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking
      • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Missing. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking
      • Checking connector
      • Checking wiring and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too High. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking
      • Checking wiring and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-2A2A: Rear Heated Oxygen Sensor (Ho2S) Preheating. Signal Too Low. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking
      • Checking wiring and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B00: Fuel Temperature Sensor. Signal Too High (B5244S; B5244S6; 2003-2006)
  • Diagnostic trouble code (DTC) information ECM-2B00
  • Signal too high
    • Checking
      • Checking components and connections
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B00: Fuel Temperature Sensor. Signal Too Low (B5244S; B5244S6; 2003-2006)
  • Diagnostic trouble code (DTC) information ECM-2B00
  • Signal too low
    • Checking
      • Checking components and connections
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-2B00: Thermostat. Faulty Signal (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-2B00
  • Faulty signal
    • Replacing the thermostat
      • Replacing the thermostat
    • Information
      • Fault-tracing information
• ECM-2B00: Thermostat. Faulty Signal (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-2B00
  • Faulty signal
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Faulty signal
    • Replacing camshaft sensor
      • Diagnostic trouble code status
      • Checking the wiring
      • Replacing camshaft sensor
    • Faulty signal. Intermittent fault
      • Fault-tracing information
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Faulty signal
      • Diagnostic trouble code status
      • Checking the wiring
      • Replacing camshaft sensor
      • Intermittent fault
      • Verification
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-3000
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking
      • Checking the status
      • Checking components and connectors
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking
      • Checking the status
      • Checking components and connectors
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Faulty Signal Or Signal Missing (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking
      • Checking the status
      • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Intermittent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Intermittent Fault (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Intermittent Fault (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Permanent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking
      • Checking connector
      • Checking cables
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Permanent Fault (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too High. Permanent Fault (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking
      • Checking the status
      • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Intermittent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Intermittent Fault (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Intermittent Fault (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Permanent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking
      • Checking connector
      • Checking cables
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Permanent Fault (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor, Intake. Signal Too Low. Permanent Fault (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal (B5244S; 2001-2004)
  • Faulty signal
  • Diagnostic trouble code (DTC) information
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal (B5244S6; 2003-2004)
  • Faulty signal
  • Diagnostic trouble code (DTC) information
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor. Faulty Signal. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Faulty signal. Permanent fault
    • Checking
      • Checking connector
      • Checking cables
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too High. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3000: Camshaft Position (CMP) Sensor. Signal Too Low. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3000: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-3000
  • Internal fault
    • Replacing the engine control module (ECM)
      • Replacing the engine control module (ECM)
    • Information
      • Fault-tracing information
• ECM-3000: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-3000
  • Internal fault
• ECM-300A: Camshaft Position (CMP) Sensor, Intake. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-300A
  • Faulty signal
    • Checking
      • Checking the camshaft position (CMP) sensor and rotor
    • Information
      • Fault-tracing information
• ECM-300A: Camshaft Position (CMP) Sensor. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-300A: Camshaft Position (CMP) Sensor. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3010
  • Signal missing
    • Checking
      • Checking components and connections
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking
      • Checking the status
      • Checking components and connectors
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking
      • Checking the status
      • Checking components and connectors
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal Or Signal Missing (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Missing (B5244S; B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-3010
  • Signal missing
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking
      • Checking the status
      • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking
      • Checking the status
      • Checking the wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too High (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking
      • Checking the status
      • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking
      • Checking the status
      • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3010: Camshaft Position (CMP) Sensor, Exhaust. Signal Too Low (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3010: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-3010
  • Internal fault
• ECM-3010: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-3010
  • Internal fault
• ECM-301A: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B5244S; B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information ECM-301A
  • Faulty signal
    • Checking
      • Checking the camshaft position (CMP) sensor and rotor
    • Information
      • Fault-tracing information
• ECM-301A: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-301A
  • Faulty signal
• ECM-3020: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-3020
  • Internal fault
• ECM-3020: Engine Control Module (ECM), Internal Fault. Faulty Signal (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-3020
  • Internal fault
• ECM-303C: Front Knock Sensor (KS). Signal Too High (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-303C
  • Signal too high. Permanent fault
    • Checking
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-303C: Front Knock Sensor (KS). Signal Too High (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-303C
  • Signal too high. Permanent fault
• ECM-303D: Front Knock Sensor (KS). Signal Too Low (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-303D
  • Signal too low. Permanent fault
    • Replacing the knock sensor (KS)
      • Checking wiring and connectors
      • Checking the knock sensor (KS) signal
      • Replacing the knock sensor (KS)
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-303D: Front Knock Sensor (KS). Signal Too Low (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-303D
  • Signal too low. Permanent fault
• ECM-304C: Rear Knock Sensor (KS). Signal Too High (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-304C
  • Signal too high. Permanent fault
    • Checking
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-304C: Rear Knock Sensor (KS). Signal Too High (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-304C
  • Signal too high. Permanent fault
• ECM-304D: Rear Knock Sensor (KS). Signal Too Low (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-304D
  • Signal too low. Permanent fault
    • Replacing the knock sensor (KS)
      • Checking wiring and connectors
      • Checking the knock sensor (KS) signal
      • Replacing the knock sensor (KS)
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-304D: Rear Knock Sensor (KS). Signal Too Low (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-304D
  • Signal too low. Permanent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Replacing the engine speed (RPM) sensor
      • Diagnostic trouble code (DTC) status ECM-3100 Engine speed (RPM) sensor. Signal missing
      • Checking the wiring and component
      • Replacing the engine speed (RPM) sensor
    • Faulty signal. Intermittent fault
      • Faulty signal. Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3100
  • Faulty signal
• ECM-3100: Engine Speed (Rpm) Sensor. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking
      • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing (B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking
      • Checking connectors and wiring
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Intermittent Fault (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B5204T5; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking
      • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B5234T3; 2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B5234T3; B5244T3; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Engine Speed (Rpm) Sensor. Signal Missing. Permanent Fault (B5244T3; 2002-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3100: Misfire, At Least One Cylinder. Start Up (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-3100
  • Emissions impact / Catalytic converter damage / Start up
    • Checking
      • Checking the fuel injection system, ignition system and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Air-leaks: in the intake system, checking
      • Notes
      • Removal
      • Installation
• ECM-3100: Misfire, At Least One Cylinder. Start Up (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-3100
  • Emissions impact / Catalytic converter damage / Start up
• ECM-310A: Engine Speed (Rpm) Sensor. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking
      • Checking the connector
      • Checking components
    • Information
      • Fault-tracing information
• ECM-310A: Engine Speed (Rpm) Sensor. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-310A
  • Faulty signal
• ECM-310A: Engine Speed (Rpm) Sensor. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-310A: Engine Speed (Rpm) Sensor. Intermittent Fault (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Intermittent fault
    • Fault-tracing information
• ECM-310A: Engine Speed (Rpm) Sensor. Intermittent Fault (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-310A
  • Intermittent fault
• ECM-310A: Engine Speed (Rpm) Sensor. Intermittent Fault (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Intermittent fault
• ECM-310C: Misfire, At Least One Cylinder. Catalytic Converter Damage (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-310C
  • Emissions impact / Catalytic converter damage / Start up
• ECM-310C: Misfire, At Least One Cylinder. Catalytic Converter Damage (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-310C
  • Emissions impact / Catalytic converter damage / Start up
• ECM-310D: Misfire, At Least One Cylinder. Affects Emissions (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information ECM-310D
  • Emissions impact / Catalytic converter damage / Start up
• ECM-310D: Misfire, At Least One Cylinder. Affects Emissions (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information ECM-310D
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3110: Misfire Cylinder 1. Start Up (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3110: Misfire Cylinder 1. Start Up (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-311C: Misfire Cylinder 1. Catalytic Converter Damage (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-311C: Misfire Cylinder 1. Catalytic Converter Damage (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-311D: Misfire Cylinder 1. Emissions Impact (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-311D: Misfire Cylinder 1. Emissions Impact (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3120: Misfire Cylinder 2. Start Up (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3120: Misfire Cylinder 2. Start Up (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-312C: Misfire Cylinder 2. Catalytic Converter Damage (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-312C: Misfire Cylinder 2. Catalytic Converter Damage (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-312D: Misfire Cylinder 2. Emissions Impact (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-312D: Misfire Cylinder 2. Emissions Impact (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3130: Misfire Cylinder 3. Start Up (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3130: Misfire Cylinder 3. Start Up (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-313C: Misfire Cylinder 3. Catalytic Converter Damage (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-313C: Misfire Cylinder 3. Catalytic Converter Damage (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-313D: Misfire Cylinder 3. Emissions Impact (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-313D: Misfire Cylinder 3. Emissions Impact (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3140: Misfire Cylinder 4. Start Up (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3140: Misfire Cylinder 4. Start Up (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-314C: Misfire Cylinder 4. Catalytic Converter Damage (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-314C: Misfire Cylinder 4. Catalytic Converter Damage (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-314D: Misfire Cylinder 4. Emissions Impact (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-314D: Misfire Cylinder 4. Emissions Impact (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3150: Misfire Cylinder 5. Start Up (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3150: Misfire Cylinder 5. Start Up (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-315C: Misfire Cylinder 5. Catalytic Converter Damage (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-315C: Misfire Cylinder 5. Catalytic Converter Damage (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-315D: Misfire Cylinder 5. Emissions Impact (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-315D: Misfire Cylinder 5. Emissions Impact (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Emissions impact / Catalytic converter damage / Start up
• ECM-3200: Ignition Coil. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
    • Information
• ECM-3200: Ignition Coil. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3200
  • Fault-tracing information
• ECM-3200: Ignition Coil. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
    • Checking
      • Checking cables and connectors
    • Information
      • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
    • Checking
      • Checking connector
      • Checking wiring and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
    • Checking
      • Checking wiring and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking
      • Checking cables
    • Information
      • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking
      • Checking wiring and components
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1, Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3300: Ignition Coil Cylinder 1. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checking
      • Checking status
      • Faulty signal. Permanent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Faulty signal. Intermittent fault
      • Checking cables and connectors
• ECM-3300: Ignition Coil Cylinder 1. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-330B: Engine Speed (Rpm) Sensor. Signal Missing (B5204T5; B5254T4; 2005-2007)
  • Signal missing
    • Checking
      • Checking connectors and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
  • Diagnostic trouble code (DTC) information ECM-330B
• ECM-330B: Engine Speed (Rpm) Sensor. Signal Missing (B5244T5; B5254T2; 2005-2009)
  • Signal missing
  • Diagnostic trouble code (DTC) information ECM-330B
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2, Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3310: Ignition Coil Cylinder 2. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3310: Ignition Coil Cylinder 2. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3, Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3320: Ignition Coil Cylinder 3. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3320: Ignition Coil Cylinder 3. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4, Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3330: Ignition Coil Cylinder 4. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3330: Ignition Coil Cylinder 4. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Missing. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5, Signal. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3340: Ignition Coil Cylinder 5. Faulty Signal (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-3340: Ignition Coil Cylinder 5. Faulty Signal (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• ECM-33X0: Ignition Coil X. Faulty Signal (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-33X0
  • Faulty signal
• ECM-3400: Camshaft Position (CMP) Sensor, Intake. Faulty Signal (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3400: Camshaft Position (CMP) Sensor, Intake. Faulty Signal (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
    • Fault-tracing information
      • Fault-tracing information
    • Information
      • Fault-tracing information
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high/signal too low. Intermittent fault
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high / signal too low. Permanent fault
    • Replacing the engine control module (ECM)
      • Replacing the engine control module (ECM)
    • Information
      • Fault-tracing information
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high / signal too low. Permanent fault
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high / signal too low. Permanent fault
• ECM-3400: Knock Sensor (KS), Test Pulse. Signal Too High/Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high / signal too low. Permanent fault
• ECM-3400: Knock Sensor (KS). Signal Too High (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Reading off the status of the diagnostic trouble code (DTC)
      • Engine control module (ECM)
    • Replacing the knock sensor (KS)
      • Checking the wiring and component
      • Replacing the knock sensor (KS)
      • Intermittent fault
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
• ECM-3400: Knock Sensor (KS). Signal Too High (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3400
  • Signal too high
• ECM-3400: Knock Sensor (KS). Signal Too High (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-3400: Knock Sensor (KS). Signal Too Low (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Reading off the status of the diagnostic trouble code (DTC)
      • Engine control module (ECM)
    • Replacing the knock sensor (KS)
      • Checking the wiring and component
      • Replacing the knock sensor (KS)
      • Intermittent fault
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
• ECM-3400: Knock Sensor (KS). Signal Too Low (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-3400
  • Signal too low
• ECM-3400: Knock Sensor (KS). Signal Too Low (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-340A: Knock Sensor (KS). Too Little Roar (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Too-little: roar
    • Checking
      • Checking components and connectors
    • Information
      • Fault-tracing information
• ECM-340A: Knock Sensor (KS). Too Little Roar (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-340A
  • Too-little: roar
• ECM-340A: Knock Sensor (KS). Too Little Roar (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Too-little: roar
• ECM-340A: Knock Sensor (KS). Too Much Roar (B5244S; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Too-much: roar
    • Checking
      • Checking components and connectors
    • Information
      • Fault-tracing information
• ECM-340A: Knock Sensor (KS). Too Much Roar (B5244S; B5244S6; 2005-2006)
  • Diagnostic trouble code (DTC) information ECM-340A
  • Too-much: roar
• ECM-340A: Knock Sensor (KS). Too Much Roar (B5244S6; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Too-much: roar
• ECM-340B: Camshaft Position (CMP) Sensor, Intake. Signal Missing (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-340B: Camshaft Position (CMP) Sensor, Intake. Signal Missing (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-340C: Camshaft Position Sensor, Intake. Signal Too High (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-340C: Camshaft Position Sensor, Intake. Signal Too High (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• ECM-340D: Camshaft Position Sensor, Intake. Signal Too Low (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checking
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-340D: Camshaft Position Sensor, Intake. Signal Too Low (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• ECM-3410: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B5204T5; B5254T4; 2005-2007)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
    • Checking
      • Checking the status
      • Checking components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• ECM-3410: Camshaft Position (CMP) Sensor, Exhaust. Faulty Signal (B5244T5; B5254T2; 2005-2009)
  • Diagnostic trouble code (DTC) information
  • Faulty signal or signal missing
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
    • Checking
      • Checking connectors and wiring
    • Information
      • Fault-tracing information
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Intermittent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too High. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Intermittent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking
      • Checking wiring and connectors
    • Information
      • Fault-tracing information
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Intermittent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Intermittent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Intermittent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Permanent Fault (B5204T5; B5254T4; 2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Permanent Fault (B5234T3; 2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Permanent Fault (B5244T3; 2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3410: Knock Sensor (KS) Front. Signal Too Low. Permanent Fault (B5254T2; 2003-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
• ECM-3410: Rear Knock Sensor (KS). Signal Too High (B5244S; 2001)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Reading off the status of the diagnostic trouble code (DTC)
      • Engine control module (ECM)
    • Replacing the knock sensor (KS)
      • Checking the wiring and component
      • Replacing the knock sensor (KS)
      • Intermittent fault
    • Verification
      • Verification
    • Information, fault-tracing has failed
      • Fault-tracing information, fault-tracing has failed
    • Information, fault does not recur
      • Fault-tracing information, fault does not recur
• ECM-3410: Rear Knock Sensor (KS). Signal Too High (B5244S; 2002)
  • Diagnostic trouble code (DTC) information