Checking the status

Fig 1: Engine Start Verification

GLL101037

Courtesy of VOLVO CARS OF NORTH AMERICA.

start the engine.
Read off the fault status of the camshaft position (CMP) sensor. "DIAGNOSIS COMPLETE" must be displayed when the camshaft position (CMP) sensor has been tested. If the fault status is "NO FAULT FOUND" when the diagnostic is complete there is an intermittent fault.

Fig 2: Identifying VCT2000 Diagnostic Tool
Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 3: Identifying Camshaft Position (CMP) Sensor
Courtesy of VOLVO CARS OF NORTH AMERICA.

Continue
Refer to Checking the wiring