LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2021 >> WRX STI >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle & Differential (TY856) >> Driven Gear Assembly >> Removal

Driven Gear Assembly: Removal

  1. Remove the manual transmission assembly from the vehicle. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>MANUAL TRANSMISSION ASSEMBLY>REMOVAL .
  2. Prepare the transmission for overhaul. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>PREPARATION FOR OVERHAUL .
  3. Remove the neutral position switch, back-up light switch and harness. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>NEUTRAL POSITION SWITCH>REMOVAL . Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>BACK-UP LIGHT SWITCH>REMOVAL .
  4. Remove the extension case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>EXTENSION CASE>REMOVAL .
  5. Remove the transfer driven gear. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>TRANSFER DRIVEN GEAR>REMOVAL .
  6. Remove the center differential. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>CENTER DIFFERENTIAL>REMOVAL .
  7. Remove the transmission case. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>TRANSMISSION CASE>REMOVAL .
  8. Remove the driven gear assembly. Refer to MANUAL TRANSMISSION AND DIFFERENTIAL(6MT) (TY85)>MAIN SHAFT ASSEMBLY>REMOVAL .
  9. Remove the 1st needle bearing.
    G05003416Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the thrust needle bearing.
scientia non olet · About LEMON Manuals