Forced Drive
CAUTION:
- After a forced operation, make sure to perform an initialize operation. Refer to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>Sunroof Control System>OPERATION>INITIALIZE OPERATION .
- For removal and installation of the cover assembly stereo camera, refer to "REMOVAL" and "INSTALLATION" of "Stereo Camera" in the "EyeSight" information and observe the precautions. Refer to EYESIGHT>STEREO CAMERA .
NOTE:
If the glass lid does not operate or the sunroof motor is not supplied with power, remove the sunroof motor and move the glass lid manually.
- Disconnect the ground terminal from battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .
- Remove the cover assembly stereo camera. Refer to EyeSight>Stereo Camera>REMOVAL .
- Remove the motor assembly. Refer to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>Sunroof Motor>REMOVAL
- Move the lid assembly manually.
- Install the motor assembly. Refer to SUNROOF/T-TOP/CONVERTIBLE TOP (SUNROOF)>Sunroof Motor>INSTALLATION .
- Install the cover assembly stereo camera. Refer to EyeSight>Stereo Camera>INSTALLATION .
- Connect the ground terminal to battery sensor. Refer to REPAIR CONTENTS>NOTE>BATTERY .