LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof System (Service Information) >> Sunroof Control System >> Operation >> Initialize Operation

Initialize Operation

CAUTION: If the switch is released during initialization operation, perform the procedure over again.
  1. Turn the ignition switch to ON.
  2. Completely tilt up the glass lid.
  3. Release the switch once, and press and hold the tilt up switch or close switch again for approx. 3 minutes.
  4. Initial learning mode will start to operate until the fully tilt closed position. The glass lid moves to the fully closed position, fully open position, and the fully closed position successively, and stops at the fully closed position.
  5. Release the tilt up switch or the close switch, and turn the ignition switch to OFF.
  6. Initial learning is completed.
scientia non olet · About LEMON Manuals