Oil Pump Cover: Removal
- Remove the transmission assembly from vehicle body. Refer to
REMOVAL , Automatic Transmission Assembly.
- Pull out the torque converter assembly. Refer to
REMOVAL , Torque Converter Assembly.
- Remove the transmission harness connector from stay.
- Remove the oil charge pipe. Refer to
REMOVAL , Oil Charge Pipe.
- Remove the ATF inlet and outlet pipes. Refer to
REMOVAL , ATF Cooler Pipe and Hose.
- Separate the converter case and transmission case. Refer to
REMOVAL , Converter Case.
- Remove the oil pump cover mounting bolt, and then separate the oil pump cover from the AT main case by lightly tapping with plastic hammer.
Courtesy of SUBARU OF AMERICA, INC.