LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Converter Case >> Removal

Converter Case: Removal

  1. Remove the transmission assembly from vehicle body. Refer to REMOVAL , Automatic Transmission Assembly.
  2. Remove the torque converter assembly. Refer to REMOVAL , Torque Converter Assembly.
  3. Remove the transmission harness connector from stay.
  4. Remove the turbine speed sensor 1. Refer to REMOVAL , Turbine Speed Sensor 1.
  5. Remove the oil charge pipe. Refer to REMOVAL , Oil Charge Pipe.
  6. Remove the ATF inlet and outlet pipes. Refer to REMOVAL , ATF Cooler Pipe and Hose.
  7. Remove the converter case attachment bolts.
  8. Lay along the transmission body, and then remove the oil pan.
  9. Remove the three converter case mounting bolts (TORX®).

    ST 18676AA020 TORX® WRENCH

    Fig 1: Identifying Converter Case Mounting Bolts
    G05668863Courtesy of SUBARU OF AMERICA, INC.
  10. Separate the converter case by lightly tapping with plastic hammer.
  11. Remove the front differential assembly. Refer to REMOVAL , Front Differential Assembly.
  12. Remove the oil seal from converter case.
scientia non olet · About LEMON Manuals