LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2012 >> Tribeca Limited >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Turbine Speed Sensor 1 >> Removal

Turbine Speed Sensor 1: Removal

  1. Set the vehicle on a lift.
  2. Disconnect the ground cable from battery.
  3. Lift up the vehicle.
  4. Remove the under cover.
  5. Remove the front exhaust pipe.
  6. Clean the transmission exterior.
  7. Disconnect the turbine speed sensor 1 connector.
    Fig 1: Identifying Turbine Speed Sensor 1 Connector
    G05022250Courtesy of SUBARU OF AMERICA, INC.
  8. Remove the turbine speed sensor 1.
scientia non olet · About LEMON Manuals