Test Description
WARNING: This page is about a different car, the 2005 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
The number below refers to the step number on the diagnostic table.
- 4: Test the deceleration sensor ground circuit for a high resistance or an open.
DTC C1232
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| Schematic Reference: ABS Schematics Connector End View Reference: ABS Connector End Views |
||||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | - | Go to Step 2 | Go to Diagnostic System Check - Vehicle in Vehicle DTC Information |
| 2 | Is U0073, U0123, U0124, or U0126 also set? | - | Go to Diagnostic Trouble Code (DTC) List - Vehicle in Vehicle DTC information | Go to Step 3 |
| 3 |
|
10-14 V | Go to Step 4 | Go to Step 5 |
| 4 | Test the deceleration sensor ground circuits of the electronic brake control module (EBCM) for a high resistance or an open. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
- | Go to Step 7 | Go to Step 6 |
| 5 | Locate and repair an open, high resistance, or short to ground in the ignition positive voltage circuit of the deceleration sensor. Did you find and correct the condition? |
- | Go to Step 7 | - |
| 6 | Replace the deceleration sensor. Refer to Deceleration Sensor Replacement . Did you complete the replacement? |
- | Go to Step 7 | - |
| 7 |
|
- | Go to Step 2 | System OK |