Entering Programming Mode

Turn ignition switch to OFF position. Remove MALL PGM (10-amp) fuse from instrument panel fuse block. Turn ignition switch to ACC position. Feature customization mode is now entered. Seat belt indicator will flash, and chime will sound 2, 3 or 4 times to indicate type of BCM used in vehicle. See DESCRIPTION & OPERATION  . Ensure installed BCM is compatible with features available on vehicle. Replace BCM if necessary. If correct BCM is installed, customize appropriate system(s) (if equipped). See AUTOMATIC POWER DOOR LOCK & UNLOCK FEATURES CUSTOMIZATION  , CONTENT THEFT DETERRENT SYSTEM FEATURES CUSTOMIZATION  , CONTENT THEFT DETERRENT SYSTEM ARMING & DISARMING CUSTOMIZATION  , INTERIOR ILLUMINATION CONTROL SYSTEM FEATURES CUSTOMIZATION  , LAST DOOR CLOSED LOCKING & LOCKOUT PREVENTION CUSTOMIZATION  and/or REMOTE KEYLESS ENTRY (RKE) SYSTEM CUSTOMIZATION  . To exit customization mode after programming is complete, turn ignition switch to OFF position, then reinstall MALL PGM fuse.