Interior Illumination Control System Features Customization

Delayed illumination turns interior lights on for 25 seconds after all doors are closed. Exit illumination illuminates interior lights for 25 seconds when ignition key is removed from ignition switch. To customize these features, enter programming mode. See ENTERING PROGRAMMING MODE . Turn interior lights thumbwheel all the way right, then slightly left. Count number of chimes. Number of chimes corresponds with mode setting. Turn thumbwheel all the way right, then slightly left until number of chimes matches desired mode setting. See INTERIOR ILLUMINATION CONTROL SYSTEM MODES table. Exit programming mode.

INTERIOR ILLUMINATION CONTROL SYSTEM MODES

Mode

Description

⁽¹⁾ Delayed & Exit Illumination Disabled

⁽²⁾ Delayed Illumination Only

⁽³⁾ Exit Illumination Only

⁽⁴⁾ Delayed & Exit Illumination Enabled

⁽¹⁾	Interior lights will illuminate or turn off while door is open or closed.

⁽²⁾	Interior lights will remain illuminated for 25 seconds after all doors are closed, or until doors are locked.

⁽³⁾	Interior lights will remain illuminated for 25 seconds after ignition key is removed from ignition switch, or until doors are locked.

⁽⁴⁾	Interior lights will stay on for 25 seconds after ignition key is removed from ignition switch, all doors are closed, or until doors are locked.