Preliminary Inspection
NOTE:
If both transmitters do not operate all system functions, check items in steps 1
- 4
BEFORE performing RKE System Operation Check.
- Ground Black/White (1455) wire between the Vehicle Access Code (VAC) connector and terminal C11 of the Keyless Entry Module connector.See WIRING DIAGRAMS .
- Check for faulty antenna or coaxial antenna cable. See TEST A: ANTENNA & TRANSMITTER OPERATION .
- Check for an open in a power or ground circuit feeding the Keyless Entry Module. See TEST B: POWER & GROUND .
- Keyless Entry Module Transmitter is not programmed. Program Keyless Entry Module Transmitter. See REMOTE TRANSMITTER under PROGRAMMING.
If both transmitters do not operate some system functions, go to RKE SYSTEM OPERATION CHECK .