Outline Of ICC Sensor Alignment Procedure

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

A 4-wheel vehicle alignment must be performed before proceeding with ICC sensor alignment procedure.
Always perform the ICC sensor alignment after removing and installing or replacing the ICC sensor.
If the ICC sensor was removed and installed or replaced, first perform ICC Sensor Initial Vertical Alignment, refer to DESCRIPTION .

CAUTION:

The system does not operate normally unless the ICC sensor is aligned properly.

Required tools, refer to REQUIRED TOOLS .
Preparation, refer to PREPARATION .
Vehicle set up, refer to VEHICLE SET UP .
Setting the ICC target board, refer to SETTING THE ICC TARGET BOARD .
ICC sensor adjustment, refer to ICC SENSOR ADJUSTMENT .