LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2007 >> CX-7 Touring, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Audio Unit Removal/Installation >> Notes

Audio Unit Removal/Installation: Notes

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION ).
    2. Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION ).
    3. Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION ).
    4. Console (See CONSOLE REMOVAL/INSTALLATION ).
    5. Hood release lever (See HOOD LATCH AND RELEASE LEVER REMOVAL/INSTALLATION ).
    6. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION ).
    7. Center panel (See CENTER PANEL REMOVAL/INSTALLATION ).
  3. Remove in the order indicated in the table.
    Fig 1: Identifying Removing Order Of Audio Unit
    G04861392Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
    CAUTION:
    • When installing the Audio unit, make sure that the wiring harness and antenna feeder are not caught between the unit and dashboard. If the wiring harness or the antenna feeder is caught between the unit and dashboard, it may cause malfunctions.
scientia non olet · About LEMON Manuals