Anti-Lock Brake System
- Specifications
- Description And Operation
- Diagnostic Tests
- Anti-Lock Control
- Notes
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Pinpoint Test A: DTC C1300 - ABS Hydraulic Pump Motor Circuit Failure
- Pinpoint Test B: DTC C1145 (RF), DTC C1155 (LF), DTC C1165 (RR), DTC C1175 (LR) - Wheel Speed Sensor Input Circuit Failure
- Pinpoint Test C: DTC C1296 (LF), DTC C1297 (RF), DTC C1298 (RR), DTC C1299 (LR) - Wheel Speed Sensor Input Signal Missing
- Pinpoint Test D: DTC B1484 - Brake Pedal Input Open Circuit
- Pinpoint Test E: DTC B1676 - Battery Voltage Out Of Range
- Pinpoint Test F: Poor Vehicle Tracking During Anti-Lock Function
- Pinpoint Test G: The Traction Control Is Inoperative/Cannot Be Disabled
- Pinpoint Test H: The Yellow Anti-Lock Brake System (ABS) Warning Indicator Does Not Self-Check
- Pinpoint Test I: The Yellow Anti-Lock Brake System (ABS) Warning Indicator Is Always On
- Pinpoint Test J: DTC C1266 - ABS Valve Power Relay Circuit Failure
- Pinpoint Test K: The Traction Control Switch Indicator Is Always On
- Pinpoint Test L: The Traction Control Disable Switch Indicator Is Never ON
- Anti-Lock Control
- Removal And Installation