LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Navigation) >> Navigation Antenna >> Removal

Navigation Antenna: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECAUTION 

    (See INSTRUMENT PANEL SAFETY PAD )

  2. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD 
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Waif for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).
  4. REMOVE LOWER NO. 3 STEERING WHEEL COVER  (See REMOVAL )
  5. REMOVE LOWER NO. 2 STEERING WHEEL COVER  (See REMOVAL )
  6. REMOVE STEERING PAD  (See REMOVAL )
  7. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  8. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  9. REMOVE FRONT DOOR OPENING TRIM COVER LH  (See REMOVAL )
  10. REMOVE SIDE INSTRUMENT PANEL LH  (See REMOVAL )
  11. REMOVE INSTRUMENT PANEL FINISH PANEL END LH  (See REMOVAL )
  12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY  (See REMOVAL )
  13. REMOVE STEERING COLUMN COVER  (See REMOVAL )
  14. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY  (See REMOVAL )
  15. REMOVE TILT AND TELESCOPIC SWITCH  (See REMOVAL )
  16. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY  (See REMOVAL )
  17. REMOVE COMBINATION METER ASSEMBLY  (See REMOVAL )
  18. REMOVE NO. 1 SWITCH HOLE BASE  (See REMOVAL )
  19. REMOVE INSTRUMENT PANEL FINISH PANEL END RH  (See REMOVAL )
  20. REMOVE FRONT DOOR SCUFF PLATE RH  (See REMOVAL )
  21. REMOVE FRONT DOOR OPENING TRIM COVER RH  (See REMOVAL )
  22. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY  (See REMOVAL )
  23. REMOVE SIDE INSTRUMENT PANEL RH  (See REMOVAL )
  24. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY  (See REMOVAL )
  25. REMOVE LOWER INSTRUMENT PANEL RH  (See REMOVAL )
  26. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY  (See REMOVAL )
  27. REMOVE UPPER CONSOLE PANEL ASSEMBLY WITH FRONT ASH RECEPTACLE  (See REMOVAL )
  28. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  29. REMOVE MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY  (See REMOVAL )
  30. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/o Seat Heater System)  (See REMOVAL )
  31. REMOVE HEATER SEAT SWITCH CONSOLE BASE (w/ Seat Heater System)  (See REMOVAL )
  32. REMOVE CONSOLE BOX POCKET  (See REMOVAL )
  33. REMOVE CONSOLE BOX CARPET  (See REMOVAL )
  34. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY  (See REMOVAL )
  35. REMOVE REAR CONSOLE BOX ASSEMBLY  (See REMOVAL )
  36. REMOVE FRONT PILLAR GARNISH LH  (See REMOVAL )
  37. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY  (See REMOVAL )
  38. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side)  (See REMOVAL )
  39. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  40. REMOVE FRONT PILLAR GARNISH RH  (See REMOVAL )
  41. REMOVE NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY  (See REMOVAL )
  42. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side)  (See REMOVAL )
  43. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  44. REMOVE NO. 1 SPEAKER HOLE COVER  (See REMOVAL )
  45. REMOVE FRONT STEREO COMPONENT SPEAKER ASSEMBLY  (See REMOVAL )
  46. REMOVE NO. 1 INSTRUMENT PANEL MOUNTING BRACKET  (See REMOVAL )
  47. REMOVE PUSH START SWITCH  (See REMOVAL )
  48. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY  (See REMOVAL )
  49. REMOVE ROOM TEMPERATURE SENSOR  (See REMOVAL )
  50. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/o DVD Player)  (See REMOVAL )
  51. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY (w/ DVD Player)  (See REMOVAL )
  52. REMOVE SIDE NO. 1 DEFROSTER NOZZLE DUCT  (See DISASSEMBLY )
  53. REMOVE SIDE NO. 2 DEFROSTER NOZZLE DUCT  (See DISASSEMBLY )
  54. REMOVE DEFROSTER NOZZLE ASSEMBLY  (See DISASSEMBLY )
  55. REMOVE NO. 1 HEATER TO REGISTER DUCT  (See DISASSEMBLY )
  56. REMOVE NO. 2 HEATER TO REGISTER DUCT  (See DISASSEMBLY )
  57. REMOVE NAVIGATION ANTENNA ASSEMBLY 
    1. Disengage the 2 clamps.
    2. Remove the 2 screws and navigation antenna assembly.
      Fig 1: Locating Navigation Antenna Assembly Clamp With Screws
      G05253377Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals