Front Side Speaker: Removal

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG (See ON-VEHICLE INSPECTION )
REMOVE FRONT DOOR ARMREST BASE PANEL ASSEMBLY (See DISASSEMBLY )
REMOVE COURTESY LIGHT ASSEMBLY (See DISASSEMBLY )
REMOVE DOOR ARMREST COVER (See DISASSEMBLY )
REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See DISASSEMBLY )
REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP (See DISASSEMBLY )
REMOVE FRONT NO. 1 SPEAKER ASSEMBLY
1. Disconnect the connector.
2. Remove the 4 screws and front No. 1 speaker assembly.
  NOTE: Do not touch the cone part of the speaker.
Fig 1: Locating No. 1 Speaker Assembly Connector And Screws
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT DOOR SCUFF PLATE (See REMOVAL )
REMOVE FRONT DOOR OPENING TRIM COVER (See REMOVAL )
REMOVE SIDE INSTRUMENT PANEL (See REMOVAL )
REMOVE FRONT PILLAR GARNISH (See REMOVAL )
REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
1. Using a screwdriver, disengage the 2 clips.
  HINT:
  
  Tape the screwdriver tip before use.
2. Disengage the 2 guides and remove the No. 1 instrument panel speaker panel sub-assembly.
  
  Fig 2: Disengaging Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT NO. 2 SPEAKER ASSEMBLY
1. Remove the 2 bolts and front No. 2 speaker assembly.
2. Lift the front No. 2 speaker assembly and disconnect the connector to remove the front No. 2 speaker assembly.
  NOTE: Do not touch the cone part of the speaker.
  
  Fig 3: Locating Front No. 2 Speaker Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002