Pinpoint Test D: Fascia Circuit (Lin) Tests
- D1: FASCIA CIRCUIT (LIN) TEST 1
- Connect the multimeter to clockspring connector C2LS41H terminal 4 and earth
Does the multimeter display > 0V and < battery voltage?
Yes: GO to Pinpoint Test G.
No: GO to D2.
- Connect the multimeter to clockspring connector C2LS41H terminal 4 and earth
- D2: FASCIA CIRCUIT (LIN) TEST 2 WARNING: Do not probe or disconnect the airbag connector(s) during this test.
- Disconnect clockspring connector C2LS41H
- Connect the multimeter to clockspring connector C2LS41H terminal 4 (harness side) and earth
Does the multimeter display > 0V and < battery voltage?
Yes: GO to Pinpoint Test F.
No: Refer to the appropriate service information and check the LIN 1 circuit (body control module to clockspring) for short circuit to ground, short circuit to power, open circuit, high resistance. Repair the harness as necessary