6F24 TCM Programming Procedure

WARNING: This page is about a different car, the 2017 Jeep Patriot and 2017 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.

PROGRAMMING THE TRANSMISSION CONTROL MODULE (TCM)

NOTE:

While performing the TCM programming procedure, the vehicle battery must be maintained between 10 and 16 volts. Ambient temperature must be between 0°C (32°F) and 60°C (140°F). Vehicle must be in Park with brake pedal depressed.

Using the scan tool and Dealer Connect, download the appropriate TCM flash file to the scan tool.
Ignition on, engine not running.
Vehicle in park with the brake pedal depressed.
Following the menu on the scan tool, program the TCM.
Clear any stored DTCs.
Road test the vehicle above 40 m.p.h. for at least two minutes.
With the scan tool, select View DTCs in the TCM.
Are there any DTCs present?

Yes
- Perform the appropriate diagnostic procedure(s).
No
- Test Complete
- Perform the TRANSMISSION VERIFICATION TEST. Refer to 6F24 TRANSMISSION VERIFICATION TEST .