Engine Control System (3.7L) (2 Of 2)

• Ecu Diagnosis Information
  • ECM
    • Reference Value
      • Values On The Diagnosis Tool
      • Terminal Layout
      • Physical Values
    • Fail safe
    • DTC Inspection Priority Chart
    • DTC Index
    • Test Value and Test Limit
  • VVEL Control Module
    • Reference Value
      • Terminal Layout
      • Physical Values
• Wiring Diagram
  • Engine Control System
    • Wiring Diagram
• Basic Inspection
  • Diagnosis And Repair Workflow
    • Work Flow
      • Overall Sequence
      • Detailed Flow
    • Diagnostic Work Sheet
      • Description
      • Worksheet Sample
  • Additional Service When Replacing ECM
    • Description
      • Notes
      • Programming Operation
    • Work Procedure
  • Additional Service When Replacing VVEL Control Module
    • Description
    • Work Procedure
  • VIN Registration
    • Description
    • Work Procedure
  • Accelerator Pedal Released Position Learning
    • Description
    • Work Procedure
  • Throttle Valve Closed Position Learning
    • Description
    • Work Procedure
  • Idle Air Volume Learning
    • Description
    • Work Procedure
  • VVEL Control Shaft Position Sensor Adjustment
    • Description
    • Work Procedure
  • Mixture Ratio Self-Learning Value Clear
    • Description
    • Work Procedure
  • Basic Inspection
    • Work Procedure
  • Fuel Pressure Check
    • Work Procedure
      • Fuel Pressure Release
      • Fuel Pressure Check
  • How To Set SRT Code
    • Description
      • Outline
      • SRT Item
      • SRT Service Procedure
    • SRT Set Driving Pattern
    • Work Procedure
  • How To Erase Permanent DTC
    • Description
      • When a DTC is stored in ECM
      • When a DTC is not stored in ECM
      • Permanent DTC item
      • Permanent DTC service procedure
    • Work Procedure (Group A)
    • Work Procedure (Group B)
• Symptom Diagnosis
  • Engine Control System Symptoms
    • Symptom Table
      • System -- Basic Engine Control System
      • System -- Engine Mechanical & Other
  • INFINITI Drive Mode Selector
    • Symptom Table
      • System-Drive Mode Selector-
  • Normal Operating Condition
    • Description
      • Fuel Cut Control (At No Load And High Engine Speed)
      • Torque Cut Control (At High Engine Oil Temperature)
• Periodic Maintenance
  • Idle Speed
    • Inspection
      • Check Idle Speed
  • Ignition Timing
    • Inspection
      • Check Ignition Timing
  • EVAP Leak Check
    • Inspection
• Positive Crankcase Ventilation
  • Inspection
• Removal And Installation
  • ECM
    • Removal and Installation
      • Notes
      • Removal
      • Installation
  • VVEL Control Module
    • Removal and Installation
      • Removal
      • Installation
• Service Data And Specifications (SDS)
  • Service Data And Specifications (SDS)
    • Idle Speed
    • Ignition Timing
    • Calculated Load Value
    • Mass Air Flow Sensor