System Tests: Notes
WARNING:
Deactivate air bag system before performing any service operation involving steering column components. See appropriate AIR BAG RESTRAINT SYSTEMS article. Do not apply electrical power to any component on steering column without first deactivating air bag system. Air bag may deploy.
CAUTION:
When battery is disconnected or modules are replaced, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.
NOTE:
After repair procedure has been completed, reconnect all components and perform SELF-DIAGNOSTIC TEST
under SELF-DIAGNOSTIC SYSTEM.
SYMPTOM INDEX
| Symptom &/Or Flash Code | Perform Test | ||||
|---|---|---|---|---|---|
| Speed Control Is Inoperative/No Flash Codes | A | ||||
| Set Speed Fluctuates | B | ||||
| Speed Control Does Not Disengage When Brakes Are Applied | C | ||||
| Speed Control Does Not Disengage When Clutch Is Applied | D | ||||
| Speed Control Switch Is Inoperative | E | ||||
| Flash With Last Switch Pressed, No Dynamic Pull Occurs & Speed Control Is Inoperative | F | ||||
| Flash With Last Switch Pressed, Dynamic Pull Occurs & Speed Control Is Inoperative | A | ||||
| Flash Code 2/Brake Pedal Position Switch Circuit Failure | G | ||||
| Flash Code 3/Deactivator Switch Circuit Failure | H | ||||
| Flash Code 4/Speed Signal Circuit Failure | J | ||||
| Flash Code 5 | (1) | ||||
| Speed Control Indicator Lamp Always On | I | ||||
| Speed Control Indicator Lamp Inoperative | (2) | ||||
|
|||||