Checking The Wiring And Terminals
- Ignition off, wait for 15 seconds.
- Disconnect the connector to the occupant weight sensor (OWS).
- Disconnect the connector for Supplemental restraint system module (SRS).
Check connectors for damage to pins and connections.
Also check the other connectors and terminals that connect the communication cables between the supplemental restraint system module (SRS) and the occupant weight sensor (OWS).
Check the communication cables between the supplemental restraint system module (SRS) and the occupant weight sensor (OWS).
Check the cable for short-circuit to ground.
Take readings between:
- Supplemental restraint system module (SRS) terminal #C1:73(#C13) and occupant weight sensor (OWS) terminal #10.
Check the cable for a short-circuit to supply voltage.
Take readings between:
- Supplemental restraint system module (SRS) terminal #C1:72(#C12) and occupant weight sensor (OWS) terminal #1.
Remedy as necessary.
Other information
- see CONNECTING THE BREAKOUT BOX
- Occupant weight sensor (OWS): see SIGNAL SPECIFICATION
- Supplemental restraint system module (SRS): see SIGNAL SPECIFICATION
- see FRONT PASSENGER WEIGHT SENSOR
- see SEAT BELT AND OTHER RESTRAINING SYSTEMS
- see CABLE HARNESS SRS SYSTEM, REPAIR
- see CHECKING WIRING AND TERMINALS
- Continue
Refer to VERIFICATION