Checking Components And Connections
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed adaptive seat belt force limiter. The adaptive seat belt force limiter could deploy
- Ignition off, wait for 15 seconds.
The supplemental restraint system module (SRS) detects that the driver's seat belt force limiter is connected to the control module.
The driver's adaptive seat belt force limiter must not be connected to the supplemental restraint system module (SRS).
- Remove the connector/component.
Other information
Continue when the fault has been remedied.
- Continue
Refer to POWERING THE SRS SYSTEM