Central Electronic Module (CEM), Rear Electronic Module (Rem), Upper Electronics Module (UEM) - Diagnostic Trouble Codes - 8 Of 13

• CEM-6C41: Antenna / Light Ring Wire Clock-Signal (ICK). Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Intermittent Fault
    • Information
      • Fault-Tracing Information
• CEM-6C41: Antenna / Light Ring Wire Clock-Signal (ICK). Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking Signal Cable
    • Replacing Central Electronic Module (CEM)
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C41: Antenna / Light Ring-Clock Signal Cable. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C41
  • Signal Too High
    • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C42: Antenna / Light Ring - Clock Signal Cable. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C42
  • Signal Too Low
    • Checking Power Supply
    • Checking Signal Cable
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C42: Antenna / Light Ring Wire Clock-Signal (ICK). Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking Ground Lead
    • Checking Power Supply
    • Checking Signal Cable
    • Checking Cable For An Open-Circuit
    • Information
      • Fault-Tracing Information
• CEM-6C42: Antenna / Light Ring Wire Clock-Signal (ICK). Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking Ground Lead
    • Checking Power Supply
    • Checking Signal Cable
    • Replacing Central Electronic Module (CEM)
    • Checking Cable For An Open-Circuit
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C43: Antenna / Light Ring - Data Communication Cable. Signal Too High (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C43
  • Signal Too High
    • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C43: Antenna / Light Ring Data Communication (Ids). Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking Signal Cable
    • Replacing Central Electronic Module (CEM)
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C43: Antenna / Light Ring Wire Data Communication (Ids). Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
• CEM-6C44: Antenna / Light Ring - Data Communication Cable. Signal Too Low (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C44
  • Signal Too Low
    • Checking Power Supply
    • Checking Signal Cable
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C44: Antenna / Light Ring Wire Data Communication (Ids). Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
• CEM-6C44: Antenna / Light Ring Wire Data Communication (Ids). Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
• CEM-6C45: Antenna / Light Ring. Communication Fault (2004)
  • Diagnostic Trouble Code (DTC) Information CEM-6C45
  • Fault-Tracing Information
• CEM-6C45: Antenna / Light Ring. Communication Problems (2005-2009)
  • Communication Fault
    • Replacing Antenna Unit
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6C45
• CEM-6C46: Antenna / Light Ring. Internal Fault (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C46
  • Internal Fault
    • Replacing Antenna Unit
    • Information
      • Fault-Tracing Information
• CEM-6C46: Antenna / Light Ring. Internal Fault. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Internal Fault. Intermittent Fault
    • Trouble-Shooting Information
• CEM-6C46: Antenna / Light Ring. Internal Fault. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Internal Fault. Permanent Fault
    • Checking Central Locking Switch
    • Replacing Central Locking Switch
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C48: Transponder Type. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C48
  • Faulty Signal
    • Checking Key Type
    • Checking Key Code
    • Damaged Transponder
    • Checking Stored Code
    • Programming Keys
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C48: Transponder Type. Faulty Signal. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing Or Faulty. Intermittent Fault.
    • Checking Start
    • Communication
    • Checking Key Type
    • Checking Key Code
    • Damaged Transponder
    • Checking Stored Code
    • Programming Keys
    • Information
      • Fault-Tracing Information
• CEM-6C48: Transponder Type. Faulty Signal. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing Or Faulty. Permanent Fault
    • Checking Key Type
    • Checking Key Code
    • Damaged Transponder
    • Checking Stored Code
    • Programming Keys
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C49: Transponder Communication. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6C49
  • Faulty Signal
    • Checking Key Type
    • Checking Start
    • Communication
    • Damaged Transponder
    • Incorrect Key
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C49: Transponder Communication. Faulty Signal. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing Or Faulty
    • Checking Key Type
    • Checking Start
    • Communication
    • Damaged Transponder
    • Incorrect Key
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6C49: Transponder Communication. Faulty Signal. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Missing Or Faulty
• CEM-6D01: Relay, Window Lift LR Up. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Wiring
    • Information
      • Fault-Tracing Information
• CEM-6D01: Relay, Window Lift LR Up. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking / Replacing Relay 2/116
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D03: Relay, Window Lift LR Up. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking Control Module For Open-Circuits
    • Information
      • Fault-Tracing Information
• CEM-6D03: Relay, Window Lift LR Up. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking / Replacing Relay 2/116
    • Replacing Relay 2/116
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D04: Relay, Window Lift LR Down. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Wiring
    • Information
      • Fault-Tracing Information
• CEM-6D04: Relay, Window Lift LR Down. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking / Replacing Relay 2/118
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D06: Relay, Window Lift LR Down Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking Control Module For Open-Circuits
    • Information
      • Fault-Tracing Information
• CEM-6D06: Relay, Window Lift LR Down. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking / Replacing Relay 2/118
    • Replacing Relay 2/118
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D07: Relay, Window Lift RR Up. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Wiring
    • Information
      • Fault-Tracing Information
• CEM-6D07: Relay, Window Lift RR Up. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking/Replacing Relay 2/117
    • Checking Control Unit
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D09: Relay, Window Lift RR Up. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking Control Module For Open-Circuits
    • Information
      • Fault-Tracing Information
• CEM-6D09: Relay, Window Lift RR Up. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking / Replacing Relay 2/117
    • Replacing Relay 2/117
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D0A: Relay, Window Lift RR Down. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Wiring
    • Information
      • Fault-Tracing Information
• CEM-6D0A: Relay, Window Lift RR Down. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Permanent Fault
    • Checking / Replacing Relay 2/119
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D0C: Relay, Window Lift RR Down. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking Control Module For Open-Circuits
    • Information
      • Fault-Tracing Information
• CEM-6D0C: Relay, Window Lift RR Down. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking / Replacing Relay 2/119
    • Replacing Relay 2/119
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6D0D: Relay, Child Safety Blocking. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too High. Intermittent Fault
    • Checking Wiring
    • Information
      • Fault-Tracing Information
• CEM-6D0D: Relay, Child Safety Blocking. Signal Too High. Permanent Fault (2001-2004)
  • Signal Too High. Permanent Fault
    • Checking / Replacing Relay 2/120
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code information
• CEM-6D0F: Relay, Child Safety Blocking. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Intermittent Fault
    • Checking Control Module For Open-Circuits
    • Information
      • Fault-Tracing Information
• CEM-6D0F: Relay, Child Safety Blocking. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic Trouble Code Information
  • Signal Too Low. Permanent Fault
    • Checking / Replacing Relay 2/120
    • Replacing Relay 2/120
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6E01: Switch, Fuel Tank Filler Cover. Faulty Signal (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6E01
• CEM-6F01: Cruise Control On/Off Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6F01
• CEM-6F02: Cruise Control Set+ Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6F02
• CEM-6F03: Cruise Control Set- Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6F03
• CEM-6F04: Cruise Control, Resume Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6F04
• CEM-6F05: Cruise Control, Cancel Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-6F05
• CEM-6F06: Cruise Control. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6F06
  • Faulty Signal
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6F07: Cruise Control. Faulty Signal (2005-2009)
  • Diagnostic Trouble Code (DTC) Information CEM-6F07
  • Faulty Signal
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-6F71: Switch, Fuel Tank Filler Cover. Signal Too Low (2002-2004)
  • Diagnostic Trouble Code (DTC) Information
  • Faulty Signal
    • Replacing Light Switch
    • Verification
    • Information
      • Fault-Tracing Information
• CEM-7A01: Scan- Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-7A01
• CEM-7A02: Scan+ Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-7A02
• CEM-7A03: Scan- Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-7A03
• CEM-7A04: Volume+ Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-7A04
• CEM-7A05: Phone Yes Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic Trouble Code (DTC) Information CEM-7A05
• CEM-7A06: Phone No Button. Activated Too Long (2005-2009)
  • Activated Too Long
    • Checking Control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A06
• CEM-7A07: RTI Right Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A07
• CEM-7A08: RTI Left Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A08
• CEM-7A09: RTI Down Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A09
• CEM-7A0A: RTI Up Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A0A
• CEM-7A0B: RTI Back Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A0B
• CEM-7A0C: RTI Enter Button. Activated Too Long (2005-2009)
  • Activated too long
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-7A0C
• CEM-8A01: Invalid Switch Position For Light Switch. Signal Faulty. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Faulty signal/signal too low. Intermittent fault.
    • Trouble-shooting information
• CEM-8A01: Invalid Switch Position For Light Switch. Signal Faulty. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Faulty signal. Permanent fault
    • Replacing Light Switch
      • Replacing Light Switch
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A01: Invalid Switch Position For The Light Switch. Faulty Position (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8A01
  • Faulty position
    • Checking the control
      • Checking the control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A02: Main Beam Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault
    • Checking the relay
• CEM-8A02: Main Beam Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high. Permanent fault
    • Checking / Replacing Relay
      • Checking Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A04: Main Beam Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault
• CEM-8A04: Main Beam Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal missing. Permanent fault
    • Checking / Replacing Relay
      • Checking Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A05: Dipped Headlamp Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault.
    • Checking Relay
• CEM-8A05: Dipped Headlamp Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high. Permanent fault
    • Checking / Replacing Relay
      • Checking Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A07: Dipped Headlamp Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault.
• CEM-8A07: Dipped Headlamp Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal missing. Permanent fault
    • Checking / Replacing Relay
      • Checking Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A08: Extra Lamp Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault
    • Checking Wire And Relay
• CEM-8A08: Extra Lamp Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high. Permanent fault
    • Checking / Replacing Wire And Relay
      • Checking Wire And Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A0A: Extra Lamp Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault
• CEM-8A0A: Extra Lamp Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal missing. Permanent fault
    • Checking / Replacing Wire And Relay
      • Checking Wire And Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A0B: Relay, Daytime Running Lamp. Signal Too High (2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checking Relay
      • Checking Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A0C: Relay, Day Running Lamp. Signal Missing (2002-2004)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checking Relay
      • Checking Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A20: Low Beam Left. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8A20
  • Signal too low
    • Checking Wiring
      • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A21: Low Beam Right. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8A21
  • Signal too low
    • Checking Wiring
      • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A30: Daytime Running Lamps, Left. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8A30
  • Faulty signal
    • Checking Wiring
      • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A31: Daytime Running Lamps, Right. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8A31
  • Faulty signal
    • Checking Wiring
      • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8A32: High Beam Flash. Activated Too Long (2005-2009)
  • Activated too long
    • Checking Control
      • Checking Control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-8A32
• CEM-8B01: Parking Lamps. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8B01
  • Signal too low
    • Checking Wiring
      • Checking Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8B01: Position Lamp Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault.
• CEM-8B01: Position Lamp Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Permanent fault
    • Checking / Replacing Relay
      • Checking Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8B03: Position Lamp Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault.
• CEM-8B03: Position Lamp Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Permanent fault
• CEM-8C11: Front Fog Lamp Switch. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Faulty signal/signal too low. Intermittent fault.
• CEM-8C11: Front Fog Lamp Switch. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Permanent fault
    • Replacing Light Switch
      • Replacing Light Switch
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8C11: Switch, Front Fog Lamps. Activated Too Long (2005-2009)
  • Activated too long
    • Checking Control
      • Checking Control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-8C11
• CEM-8C12: Rear Fog Switch Activated Too Long (2005-2009)
  • Activated too long
    • Checking Control
      • Checking Control
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
  • Diagnostic trouble code (DTC) information CEM-8C12
• CEM-8C12: Rear Fog Lamp Switch. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Faulty signal/signal too low. Intermittent fault.
• CEM-8C12: Rear Fog Lamp Switch. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Permanent fault
    • Replacing Light Switch
      • Replacing Light Switch
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8C13: Front Fog Lamp Relay. Signal Too High. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault.
• CEM-8C13: Front Fog Lamp Relay. Signal Too High. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Permanent fault
    • Checking / Replacing Relay
      • Checking Relay
      • Replacing Relay
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8C15: Front Fog Lamp Relay. Signal Missing. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Intermittent fault.
• CEM-8C15: Front Fog Lamp Relay. Signal Missing. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too high/signal missing. Permanent fault
• CEM-8D01: Ignition Lock Light And Extra Brake Light. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault.
    • Checking the wire
• CEM-8D01: Ignition Lock Light And Extra Brake Light. Signal Too Low. Permanent Fault (2001-2003)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking Wires
      • Checking Ignition Lock Wire
      • Checking Brake Light Wire
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8D01: Ignition Switch Lighting And High-Mounted Stop Lamp (Led). Signal Too Low (2004)
  • Diagnostic trouble code (DTC) information CEM-8D01
  • Signal too low. Permanent fault
• CEM-8D01: Stop Lamps. Signal Too Low (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8D01
  • Signal too low
    • Checking Status, Components And Wiring
      • Checking Status
      • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8D02: Stop Lamps. Faulty Signal (2005)
  • Diagnostic trouble code (DTC) information CEM-8D02
  • Faulty signal
    • Checking Status, Components And Wiring
      • Checking Status
      • Checking Components And Wiring
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8D03: Brake Light Switch Internal Fault (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8D03
  • Fault-tracing
    • Checking Stop Lamp Switch Status
      • Checking Stop Lamp Switch Status
    • Information
      • Fault-Tracing Information
• CEM-8D04: Internal Fault In Control Module (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8D04
  • Fault-tracing
    • Replacing Central Electronic Module (CEM)
      • Replacing Central Electronic Module (CEM)
    • Information
      • Fault-Tracing Information
• CEM-8E01: Back-Up (Reversing) Lamp Switch. Faulty Signal (2005-2009)
  • Diagnostic trouble code (DTC) information CEM-8E01
  • Faulty signal
    • Checking
      • Checking Component
      • Checking Components And Wiring, Fault Detected
      • Checking Components And Wiring, No Fault Detected
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8E01: Reversing Light. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Intermittent fault
    • Checking Wiring / Back-Up (Reversing) Light Switch
      • Checking Wiring / Back-Up (Reversing) Light Switch
    • Information
      • Fault-Tracing Information
• CEM-8E01: Reversing Light. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code (DTC) information
  • Signal too low. Permanent fault
    • Checking / Replacing Back-Up (Reversing) Lamp Switch
      • Checking Back-Up (Reversing) Lamp Switch
      • Checking Cable
      • Replacing Back-Up (Reversing) Lamp Switch
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F01: Warning Flasher And Glove Box Light. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Intermittent fault.
    • Checking the wire
• CEM-8F01: Warning Flasher And Glove Box Light. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Permanent fault
    • Replacing Switch, Hazard Warning Signal Flasher
      • Checking Cable
      • Checking Overtemperature
      • Replacing Switch, Hazard Warning Signal Flasher
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information
• CEM-8F02: Left Direction Indicator. Signal Too Low. Intermittent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Intermittent fault.
    • Checking Indicator Shunt
• CEM-8F02: Left Direction Indicator. Signal Too Low. Permanent Fault (2001-2004)
  • Diagnostic trouble code information
  • Signal too low. Permanent fault
    • Checking / Replacing Direction Indicator Shunt
      • Checking Direction Indicator Shunt
      • Replacing Direction Indicator Shunt
    • Verification
      • Verification
    • Information
      • Fault-Tracing Information