Checking the component and cable

Fig 1: Identifying Ignition OFF

Courtesy of VOLVO CARS OF NORTH AMERICA.

• Ignition off.

  Check the cable between central electronic module (CEM) connector terminal #D60 and ignition switch connector terminal #7. Check for a short-circuit to supply voltage.

  The voltage must be 0 V if the key is in position 0, I or II.

  Other information: 

  • See Connecting the breakout box
  • See Signal specification
  • See Central electronic module (CEM), replacing
  • See Contents
  Fig 2: Identifying Breakout Box

  Courtesy of VOLVO CARS OF NORTH AMERICA.
  Fig 3: Identifying Central Electronic Module (CEM) Connector Terminals

  Courtesy of VOLVO CARS OF NORTH AMERICA.

Were any faults found in the cable? 

• YES 

  Refer to Verification 

• NO 

  Refer to Replacing ignition switch connector