Transmission Control Module (TCM) Transmission Diagnostic Trouble Codes - 4 Of 7

• TCM-0087: Transmission Input Speed Sensor. Signal Too High (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checks
      • Checking the transmission input speed sensor signal
      • Checking wiring and sensors
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0087: Transmission Input Speed Sensor. Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checks
      • Checking the transmission input speed sensor signal
      • Checking wiring and sensors
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0087: Transmission Input Speed Sensor. Signal Too High (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• TCM-0088: Transmission Speed Sensor, Input Speed. Signal Missing (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• TCM-0089: Transmission Input Speed Sensor. Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Checking the transmission input speed sensor signal
      • Checking wiring and sensors
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0089: Transmission Input Speed Sensor. Signal Too Low (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Checking the transmission input speed sensor signal
      • Checking wiring and sensors
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0089: Transmission Input Speed Sensor. Signal Too Low (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• TCM-0090: Solenoid Park/Neutral Position (PNP) Switch. Signal Too High (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checks
      • Check the function solenoid for the shift lock
      • Checking the wiring and component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0090: Shift Lock Solenoid. Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code information
  • Signal too high
    • Checks
      • Checking the P-shift lock solenoid
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0090: Shift Lock Solenoid. Signal Too High (Aw50/51 AWD; 2002)
  • Diagnostic trouble code information
  • Signal too high
    • Checks
      • Checking the Shift lock solenoid
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0090: Shift Lock Solenoid. Signal Too High (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code information
  • Signal too high
• TCM-0091: Solenoid Park/Neutral Position (PNP) Switch. Signal Missing (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checks
      • Check the function solenoid for the shift lock
      • Checking the wiring and component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0091: Shift Lock Solenoid. Signal Missing (Aw50/51 AWD; 2002)
  • Diagnostic trouble code information
  • Signal missing
    • Checks
      • Checking the Shift lock solenoid
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0091: Shift Lock Solenoid. Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code information
  • Signal missing
    • Checks
      • Checking the P-shift lock solenoid
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0091: Shift Lock Solenoid. Signal Missing (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code information
  • Signal missing
• TCM-0092: Solenoid Park/Neutral Position (PNP) Switch. Signal Too Low (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Check the function solenoid for the shift lock
      • Checking the wiring and component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0092: Shift Lock Solenoid. Signal Too Low (Aw50/51 AWD; 2002)
  • Diagnostic trouble code information
  • Signal too low
    • Checks
      • Checking the P-shift lock solenoid
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0092: Shift Lock Solenoid. Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code information
  • Signal too low
    • Checks
      • Checking the P-shift lock solenoid
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0092: Shift Lock Solenoid. Signal Too Low (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code information
  • Signal too low
• TCM-0093: Gear Selector Lever Control Module Communication. Signal Too High (EU/Os) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal too high
    • Checks
      • Checking communication
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0093: Gear Selector Lever Control Module Communication. Signal Too High (EU/Os) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal too high
• TCM-0093: Gear Selector Lever Control Module Communication. Signal Too High (TAIWAN) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal too high
    • Checks
      • Checking communication
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0093: Gear Selector Lever Control Module Communication. Signal Too High (TAIWAN) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal too high
• TCM-0093: Gear Selector Lever Control Module Communication. Signal Too High (USA/CDN) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal too high
• TCM-0093: Gear Selector Lever Control Module Communication. Signal Too High (USA/CDN) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal too high
• TCM-0094: Gear Selector Lever Control Module Communication. Signal Missing (EU/Os) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal missing
    • Checks
      • Checking communication
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0094: Gear Selector Lever Control Module Communication. Signal Missing (EU/Os) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal missing
• TCM-0094: Gear Selector Lever Control Module Communication. Signal Missing (TAIWAN) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal missing
    • Checks
      • Checking communication
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0094: Gear Selector Lever Control Module Communication. Signal Missing (TAIWAN) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal missing
• TCM-0094: Gear Selector Lever Control Module Communication. Signal Missing (USA/CDN) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal missing
• TCM-0094: Gear Selector Lever Control Module Communication. Signal Missing (USA/CDN) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal missing
• TCM-0095: Gear Selector Lever Control Module Communication Signal Too Low (USA/CDN) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal too low
    • Checks
      • Checking communication
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0095: Gear Selector Lever Control Module Communication Signal Too Low (USA/CDN) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal too low
• TCM-0095: Gear Selector Lever Control Module Communication. Signal Too Low (EU/Os) (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code information
  • Signal too low
    • Checks
      • Checking communication
      • Checking the wiring and component
      • Intermittent fault
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0095: Gear Selector Lever Control Module Communication. Signal Too Low (EU/Os) (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code information
  • Signal too low
• TCM-0096: Gear Selector Module (GSM). Signal Missing (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checks
      • Checking the function of the gear-shift position sensor
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0096: QUICKSHIFT Sensor. Faulty Signal (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
    • Checks
      • Checking the position sensor
      • Checking the wiring and component
      • Verification
    • Information
      • Fault-tracing information
• TCM-0096: QUICKSHIFT Sensor. Faulty Signal (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code (DTC) information
  • Faulty signal
• TCM-0097: Faulty Software (Aw50/51 AWD; 2002-2009)
  • Faulty software
    • Ordering software and programming the control module
    • Test driving and reading off diagnostic trouble codes (DTCs)
    • Replacing the transmission control module (TCM)
• TCM-0097: Faulty Software (Aw55-50/51SN; 2001-2009)
  • Faulty software
• TCM-0098: Faulty Software (Aw50/51 AWD; 2002-2009)
  • Faulty software
• TCM-0098: Faulty Software (Aw55-50/51SN; 2001-2009)
  • Faulty software
• TCM-0099: Transmission Control Module (TCM). Internal Fault (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Internal fault
    • Control module replacement and programming
• TCM-0099: Control Module. Internal Fault (Aw50/51 AWD; 2002-2009)
  • Diagnostic trouble code (DTC) information
  • Internal fault
    • Replacing the control module and programming
• TCM-0099: Control Module. Internal Fault (Aw55-50/51SN; 2001-2009)
  • Diagnostic trouble code (DTC) information
  • Internal fault
• TCM-009A: Power Supply. Faulty Voltage (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Faulty voltage
    • Checks
      • Checking the power supply
      • Checking the battery voltage
      • Checking wiring and terminals
      • Checking the components and wiring
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-009A: Battery Voltage. Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Checking the battery voltage
      • Checking the battery terminals
      • Checking the power supply
    • Information
      • Fault-tracing information
    • Verification
      • Verification
• TCM-009A: Battery Voltage. Signal Too Low (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Checking the battery voltage
      • Checking the battery terminals
      • Checking the power supply
    • Information
      • Fault-tracing information
    • Verification
      • Verification
• TCM-009A: Battery Voltage. Signal Too Low (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
• TCM-00A0: Power Supply. Voltage Too Low (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Voltage too low
    • Checks
      • Checking the power supply
      • Checking cable and component
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-00A1: Power Supply. Voltage Too High (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Voltage too high
• TCM-00B0: Control Module. Internal Fault (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Internal fault
• TCM-0100: Transmission. Bad Gear-Shifting Quality (B5254T4, TF-80SC AWD; 2006-2007)
  • Diagnostic trouble code (DTC) information
  • Bad gear-shifting quality
    • Checks
      • Checking the diagnostic trouble codes (DTCs)
      • Check contact resistance and oxidation
      • Replacing the control system
    • Resetting adaptation
      • Resetting adaptation and counter for "Transmission oil, changing"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Fault-tracing information
      • Checking the gear system
• TCM-0100: Poor Gear Shifting Quality (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Poor gear shifting quality
    • Checks
      • Checking diagnostic trouble codes (DTCs)
      • Checking for contact resistance and oxidation
      • Replacing the control system
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0100: Poor Gear Shifting Quality (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Poor gear shifting quality
    • Checks
      • Checking diagnostic trouble codes (DTCs)
      • Checking for contact resistance and oxidation
      • Replacing the control system
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0100: Poor Gear Shifting Quality (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Poor gear shifting quality
• TCM-0101: Shift Solenoid S3. Signal Too High (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checks
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the wiring
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0101: Shift Solenoid S3. Signal Too High (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
    • Checks
      • Checking transmission fluid temperature sensor
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
    • Information
      • Fault-tracing information
    • Verification
      • Verification
• TCM-0101: Shift Solenoid S3. Signal Too High (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal too high
• TCM-0102: Shift Solenoid S3. Signal Missing (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checks
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0102: Shift Solenoid S3. Signal Missing (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Signal missing
    • Checks
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
    • Faulty signal
      • Checking transmission fluid temperature sensor
      • Checking the cable and component
      • Intermittent fault
    • Resetting Transmission fluid change counter
      • Resetting Transmission fluid change counter
• TCM-0102: Shift Solenoid S3. Signal Missing (Aw55-50/51SN; 2001-2002)
  • Diagnostic trouble code (DTC) information
  • Signal missing
• TCM-0103: Shift Solenoid S3. Signal Too Low (Aw50/51 AWD; 2002)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Checking the temperature sensor
      • Checking shift solenoid S3
      • Checking the resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "Transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information
• TCM-0103: Shift Solenoid S3. Signal Too Low (Aw50/51 AWD; Aw55-50/51SN; 2003-2009)
  • Diagnostic trouble code (DTC) information
  • Signal too low
    • Checks
      • Checking the temperature sensor
      • Checking shift solenoid s3
      • Checking resistance
      • Checking the wiring
      • Checking the control module
      • Checking the wiring and component
      • Intermittent fault
    • Resetting the adaptation
      • Resetting adaptation and the counter for "transmission oil change"
    • Verification
      • Verification
    • Information
      • Fault-tracing information