CAN network: Configuration
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2007 Volvo V70, 2006 Volvo V70, 2005 Volvo V70, 2004 Volvo V70, and 2003 Volvo V70. However, it is still accessible from the selected car via links, so may be relevant.
Instructions for the following are downloaded when a system is configured:
- Which control modules are included in the system (for example central electronic module (CEM))
- Which control module should do what (for example "you are the control module for the driver's door - you are the control module for the passenger door")
- Which functions should be included (for example if the alarm function should be on or off)
- Which components are connected to the control modules (for example whether the inclination sensor is included in the alarm or not)
- Which messages a control module is to transmit and which it is to receive
- Where the different data should be stored.
The configuration must be changed (adapted) after installing accessories and it must be downloaded again after replacing any control module. The information is stored and retrieved from Volvo's central database when downloading software.
NOTE:
Even if two cars appear identical they may behave differently due to differing configurations, a parameter may have been modified by the customer or workshop.