Checking the function of the driver door module (DDM)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2009 Volvo S60, 2008 Volvo S60, 2007 Volvo S60, 2006 Volvo S60, and 2005 Volvo S60. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition on.
Check the function of the control module by pressing the up and down buttons for the power window mechanism. The window must open or close

Also activate the central locking buttons. The doors must lock and unlock.

Is the function OK?

YES
Refer to Checking the communication with the driver door module (DDM)
NO
Refer to Checking the power supply and ground for the driver door module (DDM)

HINT: After carrying out the repair, check that the fault has been remedied.

Fig 1: Identifying Ignition ON

Courtesy of VOLVO CARS OF NORTH AMERICA.

Fig 2: Identifying Connector(s) Reinstallation

Courtesy of VOLVO CARS OF NORTH AMERICA.

Ignition off
Reconnect the connectors. Reinstall the components
Ignition on.
For further information about the fuse and terminal pin numbers, see appropriate wiring diagram.

Check the function of the control module by pressing the up and down buttons for the power window mechanism. The window must open or close

Also activate the central locking buttons. The doors must lock and unlock.

Is the function OK?

YES
OKAY: Troubleshooting has been completed.
NO
Refer to Information