Rear Trailing Arm: Installation

HINT:

• Use the same procedures for the RH side and LH side.
• The procedures listed below are for the LH side.
  Fig 1: Locating Trailing Arm Bolts And Nut

  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. TEMPORARILY INSTALL REAR TRAILING ARM ASSEMBLY LH 
   1. Temporarily install the trailing arm with the 3 bolts and nut to the axle carrier and suspension arm bracket.

      HINT:

      While fixing the nut in place, tighten the bolt.

2. INSTALL NO. 2 PARKING BRAKE CABLE ASSEMBLY  (See INSTALLATION )
3. INSTALL REAR WHEEL 

   Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf) 

   Fig 2: Locating Trailing Arm Bolts And Nut

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. TIGHTEN REAR TRAILING ARM ASSEMBLY LH 
   1. Tighten the 3 bolts and nut.

      Torque: 200 N*m (2,039 kgf*cm, 148 ft.*lbf) for axle carrier 

      150 N*m (1,530 kgf*cm, 111 ft.*lbf) for suspension arm bracket 

5. INSPECT AND ADJUST REAR WHEEL ALIGNMENT 
   1. Inspect and adjust the rear wheel alignment (see ADJUSTMENT  ).